I bought a 24V/15A switching power supply. My load is a capacitor. I just charge it with a large current for a short time (about 10-14A for 3ms). I need the charging current to be as large as possible
1. Ferrite Magnetic Amplifier in Flyback Power Supply For a dual-output flyback power supply that provides real power at both outputs (5V 2A and 12V 3A, both can achieve ± 5% regulation), when the vo
[i=s]This post was last edited by music_586 on 2018-12-28 21:00[/i] [align=center][font=Tahoma][size=5][color=#000000]Based on STM32F030+L6230 (FOC5.2 library) BLDC motor driver: program + schematic +
For example, the maximum input voltage of the DCDC power chip is 65V, and a TVS tube is connected in parallel at the input end for protection. The maximum clamping voltage of the TVS cannot exceed 65V