Analysis and Design of FIR Digital Low-pass Filter Based on MATLAB-Electron circuit-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

About the signal input mode of the power amplifier
Regarding the selection of signal input mode of power amplifier. In professional audio engineering, we often encounter problems such as signal parallel connection and bridging. First of all, we must c
My Journey of MCU Development (Part 1)
I remember that I first came into contact with microcontrollers in 2002. At that time, the only microcontrollers I knew and used were AT98C8051 and AT98C8052. I had only heard of the 51-type microcont
How to understand the accuracy parameter (1.5% + 3) of the Fluke F17B+ multimeter?
[i=s]This post was last edited by bobde163 on 2020-11-20 12:10[/i]Today I need to use Fluke F17B+ multimeter to measure uA current, which is different from the measurement of another Uni-T UT890C+. Th
Another bottleneck.
First of all, I declare that I am a rookie. Although I have worked for some years and have worked very hard, I am still a rookie. There is a cycle that makes me very distressed. When I first joined a
Easy-to-use and cheap microcontroller is here
It is a domestically produced single-chip microcomputer with ultra-low power consumption suitable for smart locks. Let's take a look at it.
Inverting proportional operational amplifier circuit
Upper computer displays waveform acquisition
Evaluation Weekly Report 20211129: There are 4 days left for Anxinke NB-IoT and domestic FPGA applications, and the wireless charging mouse pad is waiting to be disassembled (Extra)
Are there any pmos and nmos tubes with working current |Ids|=1.2A;|Vds|<0.2V, which don't matter if they are enhanced or not, and have low leakage current when turned off?
EEWORLD University Hall----TI 77GHz millimeter wave radar product introduction and solution display

Trending Downloads

Analysis and Design of FIR Digital Low-pass Filter Based on MATLAB

Document Introduction