During the commissioning and use of the 4DE1S0~4A labyrinth piston oxygen compressor, the following problems occurred: The first stage discharge pressure was too high. After stopping the machine for inspection, it was found that the high second stage pressure was due to the large gap between the third and fourth stage pistons and the inner wall of the cylinder, and oxygen leaked into the cavity under the third and fourth stage pistons through the gap. After maintenance, the cylinder and the body were aligned, and the operation of the labyrinth piston oxygen compressor returned to normal.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore