Implementing FFT transformation source program in DSP C5402

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

BlueNRG-1 chip
[i=s]This post was last edited by shy25 on 2022-3-21 16:59[/i]
Bluetooth 5 New Features and Applications
What are the new features of Bluetooth 5? It is said to be faster, with a wider coverage and stronger broadcasting capabilities. So how fast and powerful is it? Let Viki Shi, a technical support engin
GD32F130 will immediately enter the serial port interrupt after the serial port idle interrupt is turned on
MCU model: GD32F130F8P6.When debugging the serial port idle interrupt, I found that after enabling the serial port idle interrupt, the serial port will immediately enter the serial port interrupt. The
LIS2MDL array PCB board for magnetic nail navigation AGV car
A magnetic sensor array consisting of 10 LIS2MDLs is used, with each sensor spaced 25mm apart and a total board length of 250mm*20mm, to detect the position of magnetic nails. The main control uses ST
MSP430 clock problem
After the microcontroller is powered on, if the clock system is not set, the default 800 kHz DCOCLK is used as the clock source of MCLK and SMCLK . LFXT1 is connected to a 32768 Hz crystal and works i
【Repost】Master these five methods to make your MCU easily low power
Asking for advice: Question about TMS320C5509A low power mode
MATLAB offline seminar | Assisting the development of artificial intelligence and electronic products (March 30, Nanjing)
Dear seniors, please help me choose a chip
[EasyARM-RT1052 Review] + Serial port idle reception to implement modbus host

Trending Downloads