[i=s]This post was last edited by yhye2world on 2019-8-6 13:06[/i]1. Application scenario:used to measure the displacement of the tip of a signature pen;
The displacement sensor is installed inside th
I am working on the custom method (using the serial port) to program the FLASH of 430. After the program is completed, the power is turned off and reset, and the reset button can run the new program.
The first time data is received and read, it is normal. The second time data is sent, the message object does not change, and the previous data will be re-read during the next interrupt. Why is this?
1. Introduction
In the previous article, I created a product. In this article, I started to connect to the Internet. Connecting to the Internet is also very simple, but I also encountered some pitfall