This file is a CAN bus communication demonstration program; download the CAN1 and CAN2 software under CAN_TEST to two target boards respectively, connect the CAN buses of the two boards (to use CAN, short-circuit pins 1, 2 and 3, 4 of JP1, and connect CANH to CANH and CANL to CANL of the CAN bus). When the button S1 is pressed, the LED on the other board will go out, and the LED will light up when the button is released.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore