4*4 matrix keyboard experiment-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Initialization GPIO steps of TMS320C6748
See "SPRUFL8B" 2.9 Initialization section 1. Set device pin multiplexing 2. Set PSC (Power and Sleep Control Register) to enable GPIO 3. Set the direction, data, and interrupt control registers to con
The microchip Harmony interface is different from the tutorial
Help regarding microchip Harmony:I am using Microchip's PIC32MX1/2/3 Starter Kit, and the IDE I use is MPLAB X IDE v4.20.Now I have installed Harmony v3 and want to use it directly. In the Harmony tut
Automotive Ethernet (2nd) from BMW Kirsten Matheus
[i=s]This post was last edited by rockafe3in1 on 2020-10-14 18:39[/i]BackgroundRecently, I was fortunate to participate in a survey on the current status and development trends of automotive Ethernet.
Regarding 24V/1.5A power input, what kind of interface should be used on the product?
There is a project recently; external power supply of 24V/1.5A; I was stumped by the power interface on the product!!! DC socket-conventional ones are only 0.5A (there is only one reed for the ground
FAQ_How to convert Tmall Genie triples to the format used by ST mesh code
Author: ST Engineer Weisheng CHEN Click to download the pdf document to view:Keywords: Tmall Genie, triples, pythonQuestion: Using ST's mesh reference design, I design a mesh network node device that
Share the steps of DSP development
The long-awaited Digi-Key STM32F7508-DK and MAiX Bit unboxing notes
It is customary to connect a 120Ω resistor between RS485 interface AB and CAN interface H and L. I only have 100Ω in stock. Can it be replaced?
[NXP Rapid IoT Review] Online IDE Experience
Let's take a look at the GNU C __attribute__ mechanism

Trending Downloads

4*4 matrix keyboard experiment

Document Introduction