If you want to restore the factory firmware after developing SensorTile.box yourself or burning other programs for testing, you can use DFU or JTAG to flash STSW-MKSBOX1_BL firmware
Then use STBLESens
# esp32 s2 LED, button driver > ESP32-S2-Kaluga-1 development board LED, button driver. ##led driver - Hardware uses GPIO45 to control a WS2812 lamp beadRefer to the official routine for controlling W
For example, the AT070TN92 LCD data sheet says: "backlight 14-leds". Does the "LCD" here refer to the number of LEDs? How are these LCDs connected? Some are marked: 3 in series 6 or other indicators.
I saw the nRF24L01 driver in the micropython source code a long time ago, but I never tested it. Yesterday I soldered two modules, modified the GPIO definition, tested the basic communication function
Take MSP430Fr6972 as an example:1) Enter the TI official website: http://www.ti.com.cn/2) Enter: msp430fr6972 in the search bar and click go on3) Click the first search result (usually the first one i