• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3M.com/Interconnects for compliance
information (RIA E1 & C1 apply)
Date Modified: February 2, 2010
TS-2305-E
Sheet 1 of 3
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” Min.Nickel
Wiping Area: See Ordering Information
Termination: See Ordering Information
Electrical
Current Rating: 3.0A at 30°C T-rise above ambient
Contact Resistance: ≤20 mΩ
Insulation Resistance: ≥1,000 MΩ,100V
DC
Withstanding Voltage: 1,000 V
AC
for 1 minute
Environmental
Temperature Rating:
-55°C to 125°C
Process Temperature Rating:
Maximum Insulator Temperature 191°C (solder wave process only)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN C Form Plug
Right Angle, Solder Tail Termination
Table 1
Contact
Quantity
16
32
48
32
16
32
64
96
64
32
DIN 41612 Series
Part Number
DIN-016CPA-XXX-XXXX
DIN-032CPB-XXX-XXXX
DIN-048CPC-XXX-XXXX
DIN-032CPD-XXX-XXXX
DIN-016CPE-XXX-XXXX
DIN-032CPA-XXX-XXXX
DIN-064CPB-XXX-XXXX
DIN-096CPC-XXX-XXXX
DIN-064CPD-XXX-XXXX
DIN-032CPE-XXX-XXXX
A
54.40 [2.142]
54.40 [2.142]
54.40 [2.142]
54.40 [2.142]
54.40 [2.142]
94.00 [3.701]
94.00 [3.701]
94.00 [3.701]
94.00 [3.701]
94.00 [3.701]
B
44.56 [1.754]
44.56 [1.754]
44.56 [1.754]
44.56 [1.754]
44.56 [1.754]
85.20 [3.354]
85.20 [3.354]
85.20 [3.354]
85.20 [3.354]
85.20 [3.354]
C
38.10 [1.500]
38.10 [1.500]
38.10 [1.500]
38.10 [1.500]
38.10 [1.500]
78.74 [3.100]
78.74 [3.100]
78.74 [3.100]
78.74 [3.100]
78.74 [3.100]
D
48.26 [1.900]
48.26 [1.900]
48.26 [1.900]
48.26 [1.900]
48.26 [1.900]
88.90 [3.500]
88.90 [3.500]
88.90 [3.500]
88.90 [3.500]
88.90 [3.500]
4.90 ± 0.10
[.193]
10.20
[.402]
11.10
[.437]
1
2- 2.6
[ .102]
5
10
15
20
30
32
2.54
[.100]
D
5.08
[.200]
2.54
[.100]
6.00
[.236]
2.75 ± 0.250
[.108]
A(Max.)
B
5.08
[.200]
1.00
[.039]
PIN C1
PIN A1
PIN B1
C
mm
[inch]
2.95
[.116]
3.80
(.150)
Tolerance Unless Noted
X.
mm
± 0.50
.X
± 0.25
.XX
± 0.15
[ ] Dimension for Reference Only
WITH “A” RETENTION CLIP
RR1
WITHOUT RETENTION CLIP
SR1
WITH “B” RETENTION CLIPS
for .062 PCB thickness
RR1L
for .062 and .093 PCB thickness
TS-2305-E
Sheet 2 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN C Form Plug
Right Angle, Solder Tail Termination
DIN 41612 Series
2.54
[.100]
2.54
[.100]
Ø0.94-1.09
[.037-.043]
PLATED THROUGH HOLE
2 1
2.54
[.100]
c
b
a
5.08
[.200]
5.30
[.209]
C
D
Ø2.8-2.9
[.110-.114]
RECOMMENDED PCB LAYOUT
Ordering Information
DIN - XXXCP X - XXX - XX
Contact Quantity
SEE TABLE
A = A Row only (see note)
B = Rows A & C Filled
C = Rows A, B & C Filled
D = Rows A & B Filled
E = B Row only (see note)
Plating Options:
SH = 1 - 3 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
FJ = 10 - 20 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
KR = 30 - 40 μ” Gold on Contact
120 - 200 μ” Matte Tin on Terminal
HM = 3 μ” Gold on Contact, 7 μ” Min. PdNi
120 - 200 μ” Matte Tin on Terminal
Termination Options:
Solder TailTermination
SR1 = 2.75 [.108]
RR1L = 2.75 [.108] with ‘B’ retention clips
RR1 = 2.75 (.108) with “A” retention clips
Note: A and E options are currently not covered in UL File No. E68080
• This diagram serves only for Part Number descriptive definitions.
PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS.
TS-2305-E
Sheet 3 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
[align=left][color=rgb(51, 51, 51)][font=-apple-system-font, BlinkMacSystemFont, "][size=17px]Soft switching is divided into ZVS (zero voltage switching) and ZCS (zero current switching). Since ZVS ge...
I'm using FMC150 recently, which has TI's 16-bit DAC3283.
But as for converting 16-bit data into analog quantity, I have read the data sheet but still can't figure it out.
Can anyone tell me directly ...
I found the code I wrote before today, please refer to the post below.
https://en.eeworld.com/bbs/thread-1120268-1-1.html
This should be a semi-finished product. At that time, the plan was to make gra...
5G networks can greatly improve the efficiency of mobile data transmission, making the download speed of mobile terminals such as mobile phones reach 1G to 10G per second, and can download an entire h...
Background: With the State Council issuing the "Guidelines for Epidemic Prevention and Control Measures for Resuming Work and Production in Enterprises and Institutions", it is proposed that all units...
1. Pin multiplexing From the schematic diagram, we can find that timer 0 (T0) and timer 1 (T1) are multiplexed functions of P3.4 and P3.5. When these two pins are configured as timer functions, the s...[Details]
A real-time oscilloscope must be properly configured to make accurate jitter measurements. Here is a step-by-step process that can be applied to any brand of real-time oscilloscope to manually set up...[Details]
1. Output voltage adjustment
:
When manufacturing a switching power supply | voltage regulator, the first test step is to adjust the output voltage to within the specification range. Onl...[Details]
introduction
With the development of automation technology, intelligent control is widely used in military, scientific research and civilian fields. The wireless detection car integrates electronics,...[Details]
Under the general trend, the use of LEDs for general lighting is just around the corner. LEDs have many advantages in general lighting, such as longer life and higher efficiency. However, LED technol...[Details]
Recently, there have been reports that the design and configuration of the iPhone 14 models and iPhone 14 Pro models are significantly different. Specifically, the iPhone 14 and iPhone 14 Max will ...[Details]
With the increasing popularity of 5G smartphones and the advancement of large-scale construction of 5G base stations, the RF front-end market is showing a rapid growth trend. According to Yole's mar...[Details]
According to the latest news from Qichacha, Xi'an Ruixin Microelectronics Co., Ltd., a hybrid analog integrated circuit manufacturer, recently underwent a change in its investors (shareholders). One ...[Details]
Panasonic will acquire U.S. software company Blue Yonder for 700 billion yen ($6.45 billion), its largest acquisition since 2011. Image source: Nikkei Asian Review Panasonic acquired a 20% stake in...[Details]
G+D Mobile Security announced that it has won Xpeng Motors as a new customer in the electric vehicle field and will equip its new cars with smart digital car keys, providing support in all aspects ...[Details]
Today, Honor Mobile's official Weibo account revealed a new feature of the Honor X10, which will be released on the 20th of this month - a high refresh rate screen. The official said that the Honor X...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
When the 1X mode is selected, the signal enters the oscilloscope without being attenuated. When the 10X mode is selected, the signal is attenuated to 1/10 before entering the oscilloscope. When...[Details]
On January 25, the first generation of temperature sensors on Apple Watch were mainly used to track women's ovulation cycles. According to PatentlyApple, today, the U.S. Patent Office published a p...[Details]
With the development of new energy vehicles and other industries, the research and development of new energy batteries and waste recycling have become the focus of people's attention in recent years. ...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
