* See Page 8 for additional developed frequencies.
Check with factory for availability of frequencies not listed.
Description
CTS Model 656P/L is a low cost, high performance PLL clock oscillator supporting differential LVPECL or LVDS
outputs. Employing the latest IC technology, M656P/L has excellent stability and low phase jitter performance.
Ordering Information
Model
656
Output
Type
P
Frequency Code
[MHz]
XXX or XXXX
Frequency
Stability
3
Temperature
Range
I
Supply
Voltage
3
Packaging
T
Code
P
L
E
V
Output
LVPECL - Pin 1 Enable
LVDS - Pin 1 Enable
LVPECL - Pin 2 Enable
LVDS - Pin 2 Enable
Code
6
5
4
3
Stability
±20ppm
2
±25ppm
3
±30ppm
±50ppm
Code
2
3
Voltage
+2.5Vdc
+3.3Vdc
Code
Frequency
Product Frequency Code
1
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables.
3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
2] 6I Stability/Temperature combination not available.
3] Check factory availability when paired with 'I' temperature code.
Code Temp. Range
C
-20°C to +70°C
-40°C to +85°C
I
Packing
Code
1k pcs./reel
T
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
[i=s]This post was last edited by Fillmore on 2019-8-20 11:49[/i]This content is originally created by Fillmore , a user of EEWORLD forum . If you want to reprint or use it for commercial purposes, yo...
I would like to ask you guys, for the op amp's inverse proportional amplifier circuit (as shown in the figure), how to correctly select the values of R1 and R2 under the same ratio? Are there any rest...
In the past few days, I have developed some functions of TouchGFX and added controls dynamically. It was relatively smooth during computer simulation. However, when it was burned to the development bo...
[i=s]This post was last edited by Aguilera on 2019-1-9 11:00[/i] [align=left][size=3][color=#ffffff] [/color][/size][size=3][color=#000000][backcolor=white] In UART communication design, engineers wil...
Preface
This time, based on ADC and segment code display, the function of a voltmeter is realized.
process
Based on LCD_TK.
Use the upper 4 digits to display the value in mV.
From the schematic diagra...
IntroductionThis article mainly introduces the overview of the Controller Area Network (CAN) of HPM6750 (hereinafter referred to as CAN controller) and the development guidance of CAN controller based...
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
