EEWORLDEEWORLDEEWORLD

Part Number

Search

CDR32BP8R2BCZRAT

Description
cap cer 8.2pf 100v BP 1206
CategoryPassive components   
File Size234KB,37 Pages
ManufacturerVishay
Websitehttp://www.vishay.com
Download Datasheet View All

CDR32BP8R2BCZRAT Overview

cap cer 8.2pf 100v BP 1206

CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
MIL Qualified, Type CDR
FEATURES
• Military qualified products
• Federal stock control number,
CAGE CODE 2770A
• High reliability tested per MIL-PRF-55681
• Tin / lead termination codes “W”, “Z”, and “U”
• Lead (Pb)-free termination codes “Y” and “M”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Available
Available
APPLICATIONS
• Avionic systems
• Sonar systems
• Satellite systems
• Missiles applications
• Geographical information systems
• Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature:
-55 °C to +125 °C
Capacitance Range:
1.0 pF to 470 nF
Voltage Range:
6.3 V
DC
to 100 V
DC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C,
with 0 V
DC
applied
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C,
with 100 % rated V
DC
applied
BX: ± 15 % from -55 °C to +125 °C, with 0 V
DC
applied
BX: +15 %, -25 % from -55 °C to +125 °C,
with 100 % rated V
DC
applied
BR: ± 15 % from -55 °C to +125 °C,
with 0 V
DC
applied
+15 %, -40 % -55 °C to +125 °C,
with 100 % rated V
DC
applied
Dissipation Factor (DF):
BP: 0.15 % maximum
BX: 2.50 % maximum
BR:
25 V: 3.5 % maximum
> 25 V: 2.5 % maximum
Test frequency:
1 MHz ± 50 kHz for BP capacitors
1000 pF
and for BX capacitors
100 pF
All other BP, BX, and BR at 1 kHz ± 50 Hz
Aging Rate:
BP: 0 % maximum per decade
BX, BR: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000
F,
whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages:
100 V
DC
-rated: 250 % of rated voltage
Revision: 14-May-2018
Document Number: 45026
1
For technical questions, contact:
mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Reduce IP Telephony Costs with Hosted Services
The managed services model enables enterprises to get the most out of their investment.   The smaller the company, the more it needs to leverage multiple technologies to get the most out of its invest...
manyi RF/Wirelessly
2596 Inductor
2596-5 What are the effects of using low-frequency inductors? For example, if it outputs 3A, it requires 33UH, but I use low-frequency 100UH /3A....
tangwei8802429 Analog electronics
How to avoid pitfalls in GPIO operations?
GPIO operation is the most basic operation when using a microcontroller. Even if you are not careful during this operation, you will still fall into a pit .For example: use two pins (PA00 and PA01) in...
火辣西米秀 Domestic Chip Exchange
Mini2440 external interrupt programming
1. Interrupt Writing General Block Diagram2. Step-by-step introduction 1. Initialize the pin #define GPGCON (*(volatile unsigned long *)0x56000060)Refer to the above figure and set all pins to [10] to...
灞波儿奔 Microcontroller MCU
Comparison of the three major technical standards for mobile TV
The three major technical standards currently available are: T-based digital broadcasting (often referred to as the Korean standard), Europe's DVB-H, and Qualcomm's MediaFLO. The following is an analy...
soso Mobile and portable
The bigger the resistor, the greater the noise? Not necessarily!
1 Let’s look at the bad side first and review the resistor noise problem The noise of a resistor usually refers to thermal noise. Even if the resistor is not connected to the circuit and no current fl...
IIDA_Germinal PCB Design

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号