Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[b]3. Pull-up resistors and pull-down resistors[/b][align=left][color=rgb(34, 34, 34)][font="]Let's first take a look at the selection principles of pull-up resistors and the selection of pull-up resi...
I am using Cyclone V FPGA to receive 8-channel differential data, 12bit, 600M data rate. The data received by LVDS_RX core is incorrect. The 8-channel data is not synchronized. Can anyone tell me how ...
When you need to transplant the algorithm you have written to the DSP development board and run it well, what work needs to be done? The following is divided into two parts. The first part is transpla...
At present, electronic technology is widely used in automobile body electronic systems, with the goal of improving driving comfort and providing drivers with vehicle condition information. The main au...
An FIR filter (Figure 1) stores a series of n data cells, each delayed by one additional cycle. Typically, these data cells are called branches. Each branch is multiplied by a coefficient, and the res...
When it comes to the number of wires in a photoelectric level sensor, how many wires do you usually think of? Is it three?
Generally, photoelectric liquid level sensors usually have three wire...[Details]
With the widespread use of electric vehicles, DC charging piles are an important infrastructure for electric vehicles, and their normal operation is particularly important. This article analyzes th...[Details]
/***********************Copyright(c)**************************
**------------------------------------------------------------
**Created by: 康利平
**Descriptions: The original version
**Descr...[Details]
introduction
Since 1986, when Rober Bosch, one of the largest industrial enterprises in Germany, first proposed the CAN bus (Controller Area Network) technology for communication between variou...[Details]
Application areas:Automated measurement
Challenge: According to the human body impedance characteristics, measure the human pulse signal by picking up the impedance change. Use the powerful digital s...[Details]
Let’s first look at a basic block diagram example of a two-phase bipolar drive circuit.
A two-channel H-bridge drive circuit can be used to drive a two-phase bipolar stepper motor. This ...[Details]
In fact, when it comes to "energy Internet", many friends still have some questions. Why is it that a power grid company is building an "energy Internet" company?
In fact, the "Energy Internet...[Details]
There are two ways to do this: 1. Write a service program on the computer to parse the RDI commands in IAR, KEIL and ADS into the relevant JTAG protocol, and then send it to your target board throu...[Details]
New superior timing products for high-performance communications and data center applications
Beijing, China, April 18, 2024 -
Renesas Electronics, a global supplier of semicondu...[Details]
Leaker l0vetodream suggests that Apple may unveil its redesigned, colorful iMac at its April 21 event. In a tweet, the tipster posted an image of the Apple logo used to promote an upcoming event, a...[Details]
From the phenomenon of more and more private cars nowadays, we should be able to perceive that the cost of owning a car is becoming lower and lower. However, a study shows that contrary to our percep...[Details]
As the dispute between Japan and South Korea continues to escalate, South Korea's memory chip production may face supply shortages at any time, and the global semiconductor manufacturing supply chain...[Details]
In the communication system, the communication chip is the foundation of the entire hardware platform. It not only completes the data sending and receiving in the OSI physical layer, but also imple...[Details]
Wenzhou, Zhejiang, November 3, 2024 /PRNewswire/ -- This fall, Ruipu Lanjun has innovated the full-scenario power solution for commercial vehicles and passenger vehicles! Whether you need ultra-low...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
