Parallel - Fundamental Quartz Crystal, 11.999MHz Nom, SMD, 4 PIN
ABM81-11.999MHZ-6-BQ-T3 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206945817
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.01%
frequency tolerance
50 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
11.999 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
-20 °C
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
200 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-11.999MHZ-6-BQ-T3 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Circuit design, especially modern high-speed circuit system design, is a job that changes with each passing day as electronic technology develops. It is very interesting and challenging. The purpose o...
Has anyone in the forum done research on ultrasonic binary gas concentration measurement? For example, measuring oxygen concentration in air-oxygen mixed gas. I see such sensors on the Internet, but m...
Original post link: http://mc.dfrobot.com.cn/thread-275083-1-1.html http://mc.dfrobot.com.cn/thread-275083-1-1.html Not long ago, I found a Japanese guy named ARuFa who lives in people's hearts. Out o...
Gartner's recent research shows that as cloud computing technology matures and is widely adopted, more than 60% of companies have adjusted their cloud strategies to the core of their business ope...[Details]
Ultrasonic waves have the advantages of good directionality, concentrated energy, low attenuation during transmission, and strong reflection ability. Ultrasonic sensors can be widely used in non-co...[Details]
"Zheneng Automobile" and "2030 Mobility Research Laboratory" jointly conduct in-depth tracking and analysis of the development trends of the US automobile and technology industries. The IEA has rel...[Details]
Driven by the application requirements of portable devices with low power consumption and small size (cellular phones, PDAs, laptops, digital cameras, etc.), more and more semiconductor devices ado...[Details]
The battery life of electric vehicles has always been a topic that has been criticized. The arrival of winter has further exacerbated this concern. The already discounted nominal battery life has bee...[Details]
Power efficiency refers to the overall power utilization rate of the UPS, that is, the ratio of the power absorbed by the UPS from the outside to the power output to the load. This value is closely ...[Details]
/************************************************************************************** Filename: timing_delay.h Description: Time delay related functions *****************...[Details]
Mouser Electronics, an authorized global distributor of electronic components focused on introducing new products, has signed a global distribution agreement with Trenz Electronic, a manufacturer of ...[Details]
Molex, a leading global manufacturer of electronic solutions, has announced the winners of its latest Asia Pacific Distribution Awards. Molex evaluated and selected the winners based on criteria in m...[Details]
Figure 1: Near Field Acoustic Holography and Scanning Measurement System with Reference Microphones
Challenge: Develop a portable Near Field Acoustic Holography (NAH) system to measure ...[Details]
As of now, the price of a 20kw photovoltaic grid-connected inverter is 0.15-0.21 yuan/watt, the price of a 50kw photovoltaic grid-connected inverter is 0.14-0.19 yuan/watt, and the price of a 110kw...[Details]
It is predicted that in the next three years, the proportion of AMR is expected to exceed 50%.
Application is accelerating, accounting for more than 30% in 2022.
AMR (Automated Mobil...[Details]
The program design of the interrupt vector table is as follows:
CODE32
AREA Startup,CODE,READONLY
; /* Exception vector table*/
Vectors
LDR PC, ResetAddr ; Load the contents of ...[Details]
Figure . Using AD8138 to drive CAN transceiver
该电路采用5 V单电源供电，配置为单位增益单端转差分放大器，共模设置为中间电压值。R1、R2和R3组成了直流偏置电路，可将输出信号调节至CAN电平。通过将R4和R5保持在相对于R2的较小值，电位计可轻松调整两个输出信号之间的差值，不会显著影响其各自的幅度，能够向DUT提供具有可变共模电平的C...[Details]
Download Centre
京公网安备 11010802033920号
EEWORLD
