MF4200 Series
FEATURES
•
•
•
•
•
•
Resistances from 100Ohm to 100kOhms
Power Rating 0.1Watts per Resistor
Resistance Tolerances to ±0.1%
Matched Tolerances to ±0.05%
Temperature Coefficients to ±5ppm/K
Very Low Noise and Inductance
TABLE 1—SPECIFICATIONS
TYPE
Resistance Range
Resistance Ratio
Power Rating
Tolerances
Tolerance Matching
Temperature Coefficient
TCR Matching
Insolation Resistance
Operating Temperature Range
Terminals
Free air 40°C
MF4200
100 Ohm to 100kOhms
500X Between Highest and Lowest Value
0.1W per Resistor / 1W total Package
±0.1% to ±1%
to ±0.05%
±5ppm/K to ±25ppm/K
to ±3ppm/K
>10000 MOhms
-25°C to +125°C
3 to 16 Pins
FIGURE 1—CIRCUIT DESIGN
FIGURE 2—DIMENSIONS
ORDERING INFORMATION
MF42 ( # of Pins ) ( Circuit Type I / C / D ) - Resistance - Tolerance - TCR
MF4208C 22 kOhm 0.5% 15ppm
Document No.: 64315
Revision: 31-01-2015
For technical questions,
contact
powertron@vpgsensors.com
www.powertron.de
1
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
Development Kits Review Area
京公网安备 11010802033920号
EEWORLD
