Parallel - Fundamental Quartz Crystal, 30MHz Nom, SMD, 4 PIN
ABM81-30.000MHZ-6-DX-T2 Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206910181
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.33
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.002%
frequency tolerance
50 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
30 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-40 °C
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
40 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-30.000MHZ-6-DX-T2 Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
It is recommended to clearly mark the prices when selling things so that everyone can save time.I don't quite understand why people who buy things don't put prices on them. Isn't it a waste of everyon...
Last time I posted a thread,
[Raspberry Pi Pico Review] - Unboxing + Download
Everyone is very active, let's have another one this time
How to write a program? The official website has a detailed intr...
* Updated: August 11, 2021
At the first RISC-V China Summit held this year , we saw many familiar domestic chip manufacturers. It can be said that domestic chip companies are very active in the layout...
The BLE Sensor APP will be forced to obtain location permissions when in use. If you do not give location permissions or do not open the positioning APP, it will prompt that the APP cannot be used.
Be...
[i=s]This post was last edited by Rambo on 2019-5-13 17:43[/i] 1. The basic components of a quadcopter Remote controller: sends signals to the flight control; the remote controller of a quadcopter req...
The software consists of two parts: ROM code and Flash-based code.On CC2640, part of the ROM stores the TI-RTOS kernel and part of the BLE protocol stack, while on CC2640R2F, more of the BLE protocol ...
Types of OLED
With all the technologies being developed, it can be difficult to distinguish which ones are truly practical. Currently, there are two different processes for the practi...[Details]
A friend who uses an oscilloscope said that the automatic function of his oscilloscope was broken and could not be automatically successful. I looked at the video he sent and it was a straight line. ...[Details]
Zhu Yongtao, senior vice president of ZTE, said at the New Infrastructure and Enterprise Digitalization Forum held at the same time as GSMA Thrive that 5G lays the foundation for the digital economy ...[Details]
On December 5, 2020, the Greater Bay Area Integrated Circuit Industry-Education Integration Talent Training Summit Forum and the unveiling ceremony of the Guangdong University of Technology's School ...[Details]
Contents The present invention belongs to the field of measurement technology, and in particular relates to a mass flow meter and a measurement method thereof for a gas-solid mixed phase flow (such a...[Details]
Solid electronic density meter is a commonly used density meter product, mainly used for density detection of products and raw materials in industries such as powder metallurgy, rubber, plastic, compo...[Details]
For many years, designers of industrial, medical, and other isolated systems had limited means to achieve safety isolation, and the only reasonable choice was optocouplers. Today, digital isolators...[Details]
With the popularization of computers, the performance, reliability and application environment of PCs have changed dramatically. In the industrial field, PCs have a large number of supporting soft...[Details]
Before the large-scale development of wireless networks, wired layout was more commonly used, which invisibly brought great inconvenience to the layout of the monitoring system, because even with the...[Details]
The V/I converter is a circuit that can control the output current with a voltage signal. The difference between the two-wire V/I converter and the general V/I converter circuit is that the voltage...[Details]
1. Interruption problem Interrupts are very important to writing programs, so how well a program handles interrupts will directly affect the quality of the program, especially for systems with...[Details]
Reduces external component count, helping save board space
Shanghai, China, September 22, 2021 – Toshiba Electronic Devices & Storage Corporation (“Toshiba”) today announced the ad...[Details]
Vector network analysis instrument is a kind of electromagnetic wave energy testing equipment. It can measure the amplitude and phase of various parameters of a single-port network or a two-port netw...[Details]
LPC2101 is a microcontroller based on 16/32-bit ARM7 CPU embedded with high-speed Flash memory. It has the advantages of high performance, small package, low power consumption, and multiple peripheral...[Details]
With the rapid development of new energy vehicles and autonomous driving, many EMI problems have occurred in the application of automotive power chips:
First, autonomous driving and smart cock...[Details]