-
1. Determine whether the fault is inside or outside the instrument
The external wiring of the digital display controller has power supply, input signal and output signal, so when the disp...[Details]
-
How to choose a DSP?
The selection of DSP can be determined based on the following factors:
1) Speed: DSP speed is generally expressed in MIPS or FLOPS, which is one million times per ...[Details]
-
The official version of One UI 4.0 has been pushed for Samsung Note 20/Ultra in China. IT Home learned that Samsung had previously announced the One UI 4.0 update plan schedule for January 2022. ...[Details]
-
Introduction
The background of this project is to test the communication status of CAN bus and high-speed asynchronous bus in the aviation field. CAN (Controller Area Network) bus is a multi-...[Details]
-
#include "reg52.h" //header file
#include "intrins.h"
#define uchar unsigned char //macro definition
#define uint unsigned int //macro definition
sbit led_7=P1^7; //;;;LED flashes every second
sbit D...[Details]
-
If the new generation of powertrain technology "EARTH DREAMS TECHNOLOGY" released at the 2011 Honda Media Conference in Japan showed us Honda's confidence in powertrain technology, then this year's Ho...[Details]
-
IT Home reported on December 20 that according to the official website of the China Article Coding Center, the product barcode of the Chinese version of Nintendo Switch OLED has been registered...[Details]
-
Digital SourceMeter SMU instruments can simplify battery testing because they can source and measure current and voltage at the same time. These instruments can flexibly source and receive current, m...[Details]
-
Recently, SenseTime Group and Spanish company BOMAPA SERVES SL. formally signed a solution cooperation agreement at SenseTime Technology's Shanghai headquarters building.
Liu Yuangui, ...[Details]
-
LG Electronics released its preliminary third-quarter financial report on the 7th, with results exceeding market expectations. South Korean financial media "fnnews" mentioned in its report that this ...[Details]
-
A sensor is a physical device or biological organ that can detect and sense external signals, physical conditions (such as light, heat, humidity) or chemical composition (such as smoke) and transmi...[Details]
-
Collaborative robots
are
robots
that can physically interact with humans in a shared working environment
. They are designed to be flexible, safe and easy to use. They can improve prod...[Details]
-
Based on soil test results and crops, fertilizer formulas for different crops and soils are proposed to guide the production of soil-tested formula fertilizers and guide farmers to apply fertilizers ...[Details]
-
The measurement process of a digital multimeter is that the conversion circuit converts the measured value into a DC voltage signal, and then the analog/digital (A/D) converter converts the voltage...[Details]
-
When designing an analog-to-digital converter system, the initial design approach you might take is to first investigate the accuracy required and then use an ADC that provides a comparable accurac...[Details]
EE_FPGA Learning Park
京公网安备 11010802033920号
EEWORLD