EFM32LG995F128G-E-BGA120R datasheet, PDF

Datasheet> All Categories > semiconductor> Other integrated circuit (IC)> EFM32LG995F128G-E-BGA120R

EFM32LG995F128G-E-BGA120R: Descriptionarm microcontrollers - mcu 128k flash 32k ram usb 8x36 lcd aes; Categorysemiconductor Other integrated circuit (IC); File Size2MB，85 Pages; ManufacturerSilicon Laboratories Inc; Environmental Compliance

Download Datasheet Parametric Compare View All

EFM32LG995F128G-E-BGA120R Online Shopping

Suppliers	Part Number	Price	MOQ	In stock
	EFM32LG995F128G-E-BGA120R	-	-	View	Buy Now

EFM32LG995F128G-E-BGA120R Overview

arm microcontrollers - mcu 128k flash 32k ram usb 8x36 lcd aes

EFM32LG995F128G-E-BGA120R Parametric

Parameter Name	Attribute value
Manufacture	Silicon Laboratories
Product Category	ARM Microcontrollers - MCU
RoHS	Yes
Core	ARM Cortex M3
Data Bus Width	32 bi
Maximum Clock Frequency	48 MHz
Program Memory Size	64 kB
Data RAM Size	32 kB
On-Chip ADC	Yes
Operating Supply Voltage	2 V to 3.8 V
Maximum Operating Temperature	+ 85 C
Package / Case	BGA-120
Mounting Style	SMD/SMT
A/D Bit Size	12 bi
Data RAM Type	RAM
Data ROM Size	128 kB
Data ROM Type	Flash
Interface Type	I2C, SPI, UART, USB
Minimum Operating Temperature	- 40 C
Number of Programmable I/Os	93
Number of Timers	5
On-Chip DAC	Yes
Packaging	Reel
Processor Series	EFM32
Program Memory Type	Flash

Preview

Download Datasheet

View All

...the world's most energy friendly microcontrollers

EFM32LG995 DATASHEET

F256/F128/F64

•

ARM Cortex-M3 CPU platform

• High Performance 32-bit processor @ up to 48 MHz

• Memory Protection Unit

•

Flexible Energy Management System

• 20 nA @ 3 V Shutoff Mode

• 0.4 µA @ 3 V Shutoff Mode with RTC

• 0.65 µA @ 3 V Stop Mode, including Power-on Reset, Brown-out

Detector, RAM and CPU retention

• 0.95 µA @ 3 V Deep Sleep Mode, including RTC with 32.768 kHz

oscillator, Power-on Reset, Brown-out Detector, RAM and CPU

retention

• 63 µA/MHz @ 3 V Sleep Mode

• 211 µA/MHz @ 3 V Run Mode, with code executed from flash

•

256/128/64 KB Flash

•

32 KB RAM

•

93 General Purpose I/O pins

• Configurable push-pull, open-drain, pull-up/down, input filter, drive

strength

• Configurable peripheral I/O locations

• 16 asynchronous external interrupts

• Output state retention and wake-up from Shutoff Mode

•

12 Channel DMA Controller

•

12 Channel Peripheral Reflex System (PRS) for autonomous in-

ter-peripheral signaling

•

Hardware AES with 128/256-bit keys in 54/75 cycles

•

Timers/Counters

• 4× 16-bit Timer/Counter

• 4×3 Compare/Capture/PWM channels

• Dead-Time Insertion on TIMER0

• 16-bit Low Energy Timer

• 1× 24-bit Real-Time Counter and 1× 32-bit Real-Time Counter

• 3× 16/8-bit Pulse Counter

• Watchdog Timer with dedicated RC oscillator @ 50 nA

•

Integrated LCD Controller for up to 8×36 segments

• Voltage boost, adjustable contrast and autonomous animation

•

Backup Power Domain

• RTC and retention registers in a separate power domain, avail-

able in all energy modes

• Operation from backup battery when main power drains out

•

External Bus Interface for up to 4×256 MB of external

memory mapped space

• TFT Controller with Direct Drive

•

Communication interfaces

• 3× Universal Synchronous/Asynchronous Receiv-

er/Transmitter

• UART/SPI/SmartCard (ISO 7816)/IrDA/I2S

• 2× Universal Asynchronous Receiver/Transmitter

• 2× Low Energy UART

• Autonomous operation with DMA in Deep Sleep

Mode

• 2× I C Interface with SMBus support

• Address recognition in Stop Mode

• Universal Serial Bus (USB) with Host & OTG support

• Fully USB 2.0 compliant

• On-chip PHY and embedded 5V to 3.3V regulator

•

Ultra low power precision analog peripherals

• 12-bit 1 Msamples/s Analog to Digital Converter

• 8 single ended channels/4 differential channels

• On-chip temperature sensor

• 12-bit 500 ksamples/s Digital to Analog Converter

• 2× Analog Comparator

• Capacitive sensing with up to 16 inputs

• 3× Operational Amplifier

• 6.1 MHz GBW, Rail-to-rail, Programmable Gain

• Supply Voltage Comparator

•

Low Energy Sensor Interface (LESENSE)

• Autonomous sensor monitoring in Deep Sleep Mode

• Wide range of sensors supported, including LC sen-

sors and capacitive buttons

•

Ultra efficient Power-on Reset and Brown-Out Detec-

tor

•

Debug Interface

• 2-pin Serial Wire Debug interface

• 1-pin Serial Wire Viewer

• Embedded Trace Module v3.5 (ETM)

•

Pre-Programmed USB/UART Bootloader

•

Temperature range -40 to 85 ºC

•

Single power supply 1.98 to 3.8 V

•

BGA120 package

32-bit ARM Cortex-M0+, Cortex-M3 and Cortex-M4 microcontrollers for:

• Energy, gas, water and smart metering

• Health and fitness applications

• Smart accessories

• Alarm and security systems

• Industrial and home automation

...the world's most energy friendly microcontrollers

into two blocks; the main block and the information block. Program code is normally written to the main

block. Additionally, the information block is available for special user data and flash lock bits. There is

also a read-only page in the information block containing system and device calibration data. Read and

write operations are supported in the energy modes EM0 and EM1.

2.1.4 Direct Memory Access Controller (DMA)

The Direct Memory Access (DMA) controller performs memory operations independently of the CPU.

This has the benefit of reducing the energy consumption and the workload of the CPU, and enables

the system to stay in low energy modes when moving for instance data from the USART to RAM or

from the External Bus Interface to a PWM-generating timer. The DMA controller uses the PL230 µDMA

controller licensed from ARM.

2.1.5 Reset Management Unit (RMU)

The RMU is responsible for handling the reset functionality of the EFM32LG.

2.1.6 Energy Management Unit (EMU)

The Energy Management Unit (EMU) manage all the low energy modes (EM) in EFM32LG microcon-

trollers. Each energy mode manages if the CPU and the various peripherals are available. The EMU

can also be used to turn off the power to unused SRAM blocks.

2.1.7 Clock Management Unit (CMU)

The Clock Management Unit (CMU) is responsible for controlling the oscillators and clocks on-board

the EFM32LG. The CMU provides the capability to turn on and off the clock on an individual basis to all

peripheral modules in addition to enable/disable and configure the available oscillators. The high degree

of flexibility enables software to minimize energy consumption in any specific application by not wasting

power on peripherals and oscillators that are inactive.

2.1.8 Watchdog (WDOG)

The purpose of the watchdog timer is to generate a reset in case of a system failure, to increase appli-

cation reliability. The failure may e.g. be caused by an external event, such as an ESD pulse, or by a

software failure.

2.1.9 Peripheral Reflex System (PRS)

The Peripheral Reflex System (PRS) system is a network which lets the different peripheral module

communicate directly with each other without involving the CPU. Peripheral modules which send out

Reflex signals are called producers. The PRS routes these reflex signals to consumer peripherals which

apply actions depending on the data received. The format for the Reflex signals is not given, but edge

triggers and other functionality can be applied by the PRS.

2.1.10 External Bus Interface (EBI)

The External Bus Interface provides access to external parallel interface devices such as SRAM, FLASH,

ADCs and LCDs. The interface is memory mapped into the address bus of the Cortex-M3. This enables

seamless access from software without manually manipulating the IO settings each time a read or write

is performed. The data and address lines are multiplexed in order to reduce the number of pins required

to interface the external devices. The timing is adjustable to meet specifications of the external devices.

The interface is limited to asynchronous devices.

2.1.11 TFT Direct Drive

The EBI contains a TFT controller which can drive a TFT via a 565 RGB interface. The TFT controller

supports programmable display and port sizes and offers accurate control of frequency and setup and

2014-06-13 - EFM32LG995FXX - d0124_Rev1.30

www.silabs.com

...the world's most energy friendly microcontrollers

hold timing. Direct Drive is supported for TFT displays which do not have their own frame buffer. In

that case TFT Direct Drive can transfer data from either on-chip memory or from an external memory

device to the TFT at low CPU load. Automatic alpha-blending and masking is also supported for transfers

through the EBI interface.

2.1.12 Universal Serial Bus Controller (USB)

The USB is a full-speed USB 2.0 compliant OTG host/device controller. The USB can be used in Device,

On-the-go (OTG) Dual Role Device or Host-only configuration. In OTG mode the USB supports both

Host Negotiation Protocol (HNP) and Session Request Protocol (SRP). The device supports both full-

speed (12MBit/s) and low speed (1.5MBit/s) operation. The USB device includes an internal dedicated

Descriptor-Based Scatter/Garther DMA and supports up to 6 OUT endpoints and 6 IN endpoints, in

addition to endpoint 0. The on-chip PHY includes all OTG features, except for the voltage booster for

supplying 5V to VBUS when operating as host.

2.1.13 Inter-Integrated Circuit Interface (I2C)

The I C module provides an interface between the MCU and a serial I C-bus. It is capable of acting as

both a master and a slave, and supports multi-master buses. Both standard-mode, fast-mode and fast-

mode plus speeds are supported, allowing transmission rates all the way from 10 kbit/s up to 1 Mbit/s.

Slave arbitration and timeouts are also provided to allow implementation of an SMBus compliant system.

The interface provided to software by the I C module, allows both fine-grained control of the transmission

process and close to automatic transfers. Automatic recognition of slave addresses is provided in all

energy modes.

2.1.14 Universal Synchronous/Asynchronous Receiver/Transmitter (US-

ART)

The Universal Synchronous Asynchronous serial Receiver and Transmitter (USART) is a very flexible

serial I/O module. It supports full duplex asynchronous UART communication as well as RS-485, SPI,

MicroWire and 3-wire. It can also interface with ISO7816 SmartCards, IrDA and I2S devices.

2.1.15 Pre-Programmed USB/UART Bootloader

The bootloader presented in application note AN0042 is pre-programmed in the device at factory. The

bootloader enables users to program the EFM32 through a UART or a USB CDC class virtual UART

without the need for a debugger. The autobaud feature, interface and commands are described further

in the application note.

2.1.16 Universal Asynchronous Receiver/Transmitter (UART)

The Universal Asynchronous serial Receiver and Transmitter (UART) is a very flexible serial I/O module.

It supports full- and half-duplex asynchronous UART communication.

2.1.17 Low Energy Universal Asynchronous Receiver/Transmitter

(LEUART)

The unique LEUART , the Low Energy UART, is a UART that allows two-way UART communication on

a strict power budget. Only a 32.768 kHz clock is needed to allow UART communication up to 9600 baud/

s. The LEUART includes all necessary hardware support to make asynchronous serial communication

possible with minimum of software intervention and energy consumption.

2.1.18 Timer/Counter (TIMER)

The 16-bit general purpose Timer has 3 compare/capture channels for input capture and compare/Pulse-

Width Modulation (PWM) output. TIMER0 also includes a Dead-Time Insertion module suitable for motor

control applications.

2014-06-13 - EFM32LG995FXX - d0124_Rev1.30

www.silabs.com

EFM32LG995F128G-E-BGA120R Related Products

	EFM32LG995F128G-E-BGA120R	EFM32LG995F256G-E-BGA120R	EFM32LG995F64G-E-BGA120R
Description	arm microcontrollers - mcu 128k flash 32k ram usb 8x36 lcd aes	arm microcontrollers - mcu 256k flash 32k ram usb 8x36 lcd aes	arm microcontrollers - mcu 64k flash 32k ram usb 8x36 lcd aes
Manufacture	Silicon Laboratories	Silicon Laboratories	Silicon Laboratories
Product Category	ARM Microcontrollers - MCU	ARM Microcontrollers - MCU	ARM Microcontrollers - MCU
RoHS	Yes	Yes	Yes
Core	ARM Cortex M3	ARM Cortex M3	ARM Cortex M3
Data Bus Width	32 bi	32 bi	32 bi
Maximum Clock Frequency	48 MHz	48 MHz	48 MHz
Program Memory Size	64 kB	64 kB	64 kB
Data RAM Size	32 kB	32 kB	32 kB
On-Chip ADC	Yes	Yes	Yes
Operating Supply Voltage	2 V to 3.8 V	2 V to 3.8 V	2 V to 3.8 V
Maximum Operating Temperature	+ 85 C	+ 85 C	+ 85 C
Package / Case	BGA-120	BGA-120	BGA-120
Mounting Style	SMD/SMT	SMD/SMT	SMD/SMT
A/D Bit Size	12 bi	12 bi	12 bi
Data RAM Type	RAM	RAM	RAM
Data ROM Size	128 kB	128 kB	128 kB
Data ROM Type	Flash	Flash	Flash
Interface Type	I2C, SPI, UART, USB	I2C, SPI, UART, USB	I2C, SPI, UART, USB
Minimum Operating Temperature	- 40 C	- 40 C	- 40 C
Number of Programmable I/Os	93	93	93
Number of Timers	5	5	5
On-Chip DAC	Yes	Yes	Yes
Packaging	Reel	Reel	Reel
Processor Series	EFM32	EFM32	EFM32
Program Memory Type	Flash	Flash	Flash

Recommended Resources

Battery fast charging control integrated circuit design

Car anti-theft alarm circuit (1)

Square wave oscillator

Overvoltage protection circuit for any AC power source

Multipurpose household appliance protection circuit

RD-l type 3 1/2 digit mostly used resistance measuring instrument circuit

Design of Intelligent Vehicle Safety System Based on DSP: 1 Introduction　　Since the 21st century, the automobile industry has played a leading role. At the same time, the proportion of electronic equipment in the cost of vehicle manufacturing has increased f...; Aguilera DSP and ARM Processors

Digital clock design based on FPGA (video source code): 视频过大，打包成15个压缩包...; njiggih FPGA/CPLD

The relationship between wavelength and frequency and conversion tools: Relationship and conversion between frequency and wavelengthRequired Data EntryInput frequencyFrequency UnitSelect Frequency DesignationHertzKilohertzMegahertzGigahertzCalculation resultsThe input fre...; btty038 RF/Wirelessly

RISC-V Processor Design Course Series——CPU Basics: Mainly introduce the basic knowledge related to CPU, and understand the birth of RISC-V from the perspective of CPU development...; 火辣西米秀 Domestic Chip Exchange

Qorvo's 802.11AX 5 GHZ FEM Dramatically Improves Wi-Fi Performance: QPF4528 with improved thermal management and higher linear power transfer rates powers new H3C access pointsQorvoInc. (Nasdaq: QRVO), a leading provider of RF solutions that connect the world, today a...; Jacktang RF/Wirelessly

Unstable waveform: I have a question. A circuit is powered by DC and a waveform can be displayed on an oscilloscope, but the waveform is unstable. Is it a problem with the filter circuit?...; 梅花飘落孤人醉 Analog electronics

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components