16-Mbit 3.0V Serial Flash Memory with Uniform 4 kB Sectors
Data Sheet
S25FL216K Cover Sheet
Notice to Readers:
This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See
Notice On Data Sheet Designations
for definitions.
Publication Number S25FL216K_00
Revision
10
Issue Date
September 16, 2013
D a t a
S h e e t
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S25FL216K_00_10 September 16, 2013
S25FL216K
16-Mbit 3.0V Serial Flash Memory with Uniform 4 kB Sectors
Data Sheet
Distinctive Features
Single power supply operation
– Full voltage range: 2.7 to 3.6V
Flexible Architecture with 4 kB Sectors
–
–
–
–
–
Sector Erase (4 kB)
Block Erase (64 kB)
Page Program up to 256 bytes
100k erase/program cycles typical
20-year data retention typical
16-Mbit Serial Flash
– 16-Mbit/2048 kbyte/9192 pages
– 256 bytes per programmable page
– Uniform 4-kbyte Sectors/64-kbyte Blocks
Standard and Dual
–
–
–
–
Standard SPI: SCK, CS#, SI, SO, WP#, HOLD#
Dual SPI: SCK, CS#, SI/IO0, SO, WP#, HOLD#
Fast Read Dual Output instruction
Auto-increment Read capability
Software and Hardware Write Protection
– Write Protect all or portion of memory via software
– Enable/Disable protection with WP# pin
High Performance Program/Erase Speed
–
–
–
–
Page program time: 1.6 ms typical
Sector erase time (4 kB): 45 ms typical
Block erase time (64 kB): 450 ms typical
Chip erase time: 12 seconds typical
High Performance
– FAST READ (Serial): 65 MHz clock rate
– DUAL OUTPUT READ: 65 MHz clock rate
Low Power Consumption
– 12 mA typical active current
– 15 µA typical standby current
Package Options
– 8-pin SOIC 150/208-mil
– All Pb-free packages are RoHS compliant
General Description
The S25FL216K device is a 16-Mbit, 2048-kbyte Serial Flash memory, with advanced write protection mechanisms. The
S25FL216K supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output using SPI pins: Serial
Clock, Chip Select, Serial SI/IO0, SO, WP#, and HOLD#. SPI clock frequencies of up to 65 MHz are supported.
The S25FL216K array is organized into 8,192 programmable pages of 256 bytes each. Up to 256 bytes can be programmed at
a time. Pages can be erased in groups of 16 (4-kB Sector Erase), groups of 256 (64-kB Block Erase) or the entire chip (Chip
Erase). The S25FL216K has 512 erasable sectors and 32 erasable blocks. The small 4 kB sectors allow for greater flexibility in
applications that require data and parameter storage.
A Hold pin, Write Protect Pin and programmable write protection provide further control flexibility. Additionally, the S25FL216K
device supports JEDEC standard manufacturer and device identification.
Publication Number S25FL216K_00
Revision
10
Issue Date
September 16, 2013
This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion Inc. deems the products to have been in sufficient pro-
duction volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the valid com-
[font=微软雅黑][size=4]Many years from now, perhaps our home will really become like the one in the movie "The Wandering Earth", but it may not be because the sun is rapidly aging and expanding, but becau...
Bluetooth can be searched, but cannot be connected. Occasionally it can be connected, but it will be disconnected. The displayed signal strength is between -25~-55dB, which is similar to the signal st...
[color=#333333][font=微软雅黑][size=18px][color=#000][b]Overview of kernel workqueues[/b][/color] [color=#000]Workqueues are another way to postpone work execution. Workqueues can postpone work and hand i...
[i=s] This post was last edited by Yunhu Congbai on 2022-1-14 10:20 [/i] ## Preface The board has not been received yet. Let's get the compilation environment done first, and then merge M23 into my M-...
1.1C55x CPU system
C55x has one 32-bit program data bus (PB), five 16-bit data buses (BB, CB, DB, EB, FB), one 24-bit program address bus and five 23-bit data address buses, which are connected to the...
Milestone of 100 million units delivered reached CEVA-powered cellular IoT chips are used in the largest IoT markets, including wearables, smart meters, asset tracking and industrial IoT MOUNTAI...[Details]
The PWM DC motor speed regulation simulation schematic diagram is as follows. The PWM DC motor speed regulation schematic diagram and PCB diagram drawn by Altium Designer are as follows: The PWM...[Details]
With the popularity of new energy vehicles and the enhancement of environmental awareness, the construction and planning of electric vehicle charging piles have become an important part of urban in...[Details]
On March 14, MediaTek released the first built-in multi-core artificial intelligence processor, Helio P60 , at Beijing 798 Art Center . Let's learn more about it with the mobile phone portable edit...[Details]
One network cable, one IP, and all operations are done by IE browser. Whether it is viewing waveforms, taking screenshots, or upgrading firmware, it's all done, it's that simple! 1. Operation s...[Details]
After reading the introduction of TFTLCD and FSMC (Flexible Static Memory Controller), I still have only a vague understanding and don't understand what they are talking about. TFTLCD uses 80 paralle...[Details]
Starting from the right, the 8 digital tubes display 0 to 7 in turn. #include STC89C5xRC.H void delay()//provide delay { int i, j; for(i = 0; i 300 ; i++) for(j = 0; j 300; j++); } void f...[Details]
NEPCON China 2019, the 29th China International Electronics Production Equipment and Microelectronics Industry Exhibition, will be held at the Shanghai Exhibition Center from April 24 to 26 this year...[Details]
Interrupt Architecture: S3C2440 has a total of 60 interrupt sources, of which 15 are sub-interrupt sources, which correspond to each bit in the SUBSRCPND register, and the other 45 interrupt sourc...[Details]
Startup Piera Systems is combining air quality monitoring with specially designed chips to provide users with better and more granular information.
Piera makes air quality sensors, but a...[Details]
introduction
The measurement of temperature and humidity is widely used in industrial and agricultural production, daily life and scientific research. However, due to the nonlinear output ...[Details]
A new survey on data personalization, privacy and trust from Genesys, a global leader in cloud customer experience and contact center solutions, found that highly regulated organizations have the gre...[Details]
According to Wired, the Defense Advanced Research Projects Agency (DARPA) of the United States Department of Defense recently promoted to attendees at the Def Con 27 hacker conference a truly secure ...[Details]
introduction
Modern living patterns make the safety of family life particularly important. At present, security prevention and alarm systems are important guarantees for ensuring the safety of ...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
