85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Currently, all smart clocks and smart ornaments on the market need the function of obtaining time and weather information. Many customers and friends have asked about this before, so I wrote this arti...
This Electric Vehicle Service Equipment (EVSE) reference design adds Wi-Fi capabilities to J1772 Level 1 and Level 2 charging infrastructure. The CC3100 network processor enables highly embedded devic...
Click to enter the lucky flip event page, what are you waiting for, come and participate!Event time:February 8, 2022 - February 28, 2022Activity Rules1. New customers can enjoy one chance to flip the ...
1.4.17 Advanced Control Timer (Timer6)
Advanced Control Timer 6 (Timer6) is a high-performance timer with a 16-bit count width. It can be used to count and generate clock waveforms of different forms ...
In circuit design, when the input power is 12V or 24V, the power supply is 5V or 3.3V. We often encounter the problem of multiple power supplies.
A low-cost method is to use transformer regulation. On...
In order to solve a series of problems in the electrical system, such as short control distance, weak real-time switch response, general intelligent nodes are easily disturbed by the outside wor...[Details]
Today, let's first play with the compilation and downloading of the Linux kernel. 1. Background Development environment: 64-bit Ubuntu 14.04; Compilation tool: arm-linux-gcc 4.4.3; Download tool: S...[Details]
According to the Korea Times, although South Korea launched the world's first 5G service in early April, the performance of South Korea's three telecom operators in April-June may be lower than expec...[Details]
Medical Protective Clothing Electrostatic Decay Performance Tester Main Application: The Medical Protective Clothing Electrostatic Decay Performance Tester is used to test textile clothing, medical p...[Details]
Earlier, it was reported that Konjac Technology, a company in Xiaomi's ecological chain, is planning to launch an e-cigarette brand. The company's founder is Zhong Yufei, a top 25 employee of Xiaomi....[Details]
Recently, Fenghua High-Tech stated in an institutional survey that the first phase of the company's Xianghe Industrial Park high-end capacitor base project has a designed production capacity of 5 bil...[Details]
introduction
At present, urban security systems are receiving more and more attention, and customers have higher and higher requirements on the functions and performance of security systems.
...[Details]
The frequency converter is a power converter in the motion control system. Today's motion control system is a technical field that includes multiple disciplines. The general development trend is: AC ...[Details]
Keysight Vector Network Analyzers (VNAs) cannot measure the velocity of propagation directly. Instead, the method outlined in the following steps calculates the velocity of propagation based on the p...[Details]
The ZigBee Alliance recently announced that it has begun developing communication specifications for smart meters and smart grids to ensure that the wireless smart grid Neighborhood Area Network (NAN...[Details]
Just like money can be deposited and withdrawn at any time in a bank, electricity can also be charged or discharged at any time, becoming a controllable energy source. This emerging industry, which is...[Details]
We know that the degree of error is called precision. Instruments with high precision have small measurement errors, while instruments with low precision have large measurement errors. Usually, pr...[Details]
Most books are too theoretical when introducing character drivers. A chapter overview is just a bunch of text, with some fragmented codes attached, which makes people dizzy and naturally don't want...[Details]
Ray tracing is a technology that any engineer worth their salt working in AR/VR/XR, product design, or simulation should be familiar with. It’s one of the most important advancements in graphics tech...[Details]
The vertical flame chamber is used to measure the flame retardancy, glow propagation and carbonization properties of fabrics, children's clothing, foam, paper and other materials. The purpose of this...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
