-
ts.c source code: #include "linux/module.h" #include "linux/init.h" #include "linux/fs.h" #include "linux/interrupt.h" #include "linux/irq.h" #include "linux/sched.h" #include "linux/pm.h" #include "...[Details]
-
Japanese memory giant Kioxia held an online board meeting on the 27th and planned to restart the IPO process. At the same time, there were reports that Western Digital of the United States was intere...[Details]
-
0 Introduction
At present, various electronic products are used in all aspects of our daily life, but all electronic products have a certain service life and will gradually age over time. Circuit te...[Details]
-
China's new energy vehicles did not start very well in 2020. At present, Europe should take two steps forward in 2020. In 2019, Europe's new energy vehicles reached 564,200 units, an increase of 38.9...[Details]
-
Abstract: From an application perspective, the application techniques of integrated multi-channel analog switches are studied and discussed with examples. These application skills are highly tar...[Details]
-
Many precision instruments, industrial automation, medical equipment and automatic test equipment applications require high accuracy digital-to-analog conversion. Linear Technology Corporation has in...[Details]
-
The driving LED lights in the previous blog experiments belong to the GPIO output control. This chapter will further consolidate the GPIO output control of I.MX6U. There is an active buzzer on the I....[Details]
-
/*************************************************************** Function: Implement the timing counter of the microcontroller *******************************************************************/ #in...[Details]
-
Most of the analyses of u-boot.lds files on the Internet are the same. For example, the following is the information about u-boot.lds that I found on the Internet. OUTPUT_FORMAT("elf32-littlearm", ...[Details]
-
A system that uses wireless LAN (Wi-Fi) to control LED lighting in offices and stores one by one. Specifically, a small power supply circuit and a wireless communication module are built into each fl...[Details]
-
Why can't the tube radio receive a station?
First, touch the surface temperature of the electron tube with your hand after turning on the machine for a few minutes. Under normal circumstances,...[Details]
-
A pair of power amplifier transistors in the inverter power stage were damaged. After replacing the transistors of the same model, they burned out again after running for a period of time. The reason ...[Details]
-
【question】 The maximum bus clock of APB1 of STM32F103 is 1/2 of the AHB bus clock, which is 36MHz at most. When using ST's library function (v2.0), the clock frequency of TIM2 (normal timer) is 72MHz...[Details]
-
There are two timers T0 and T1 in the 51 series of MCUs. There is a lot of information on the Internet. The 52 MCU has one more timer T2 and 128 bytes of RAM than the 51 MCU. The function of timer T2 ...[Details]
-
Crank press and servo press are two common metal processing equipment, which are widely used in metal forming, stamping, stretching, etc. Although they have similarities in some aspects, there are ...[Details]
onsemi and Avnet IoT Innovation Design Competition
京公网安备 11010802033920号
EEWORLD