400V 3A Universal Plastic Rectifier
Features
Product Name: 400V 3A General Purpose Plastic Rectifier
Product model: 1N5404
FEATURE:
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed:
250℃/10sec/0.375” (9.5mm) lead length at 5 lbs tension
MECHANICAL DATA:
Terminal: Plated axial leads solderable per
MIL – STD 202E, method 208C
Case: Molded with UL-94 Class V-O recognized flame retardant epoxyt
Polarity: Color band denotes cathode
Mounting position:Any
Technical Parameters:
Maximum Ratings and Characteristics (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20%)
Maximum Repetitive Peak Reverse Voltage,VRRM:400V
Maximum RMS Voltage,VRMS :280V
Maximum DC Blocking Voltage, VDC:400V
Maximum Average Forward Rectified Current (9.5mm lead length,at Ta=90℃):3.0A
Peak Forward Surge Current (8.3ms single half sine-wave superimposed on reated load),IFSM:200A
Maximum Instantaneous Forward Voltage (at rated forward current), VF:1.1V
Maximum Fullload Reverse Current (full cycle at TL=75℃). IR(AV):30μA
Maximum DC Reverse Current (at rated DC blocking voltage),IR:5.0μA(Ta=25℃) 50μA(Ta=150℃)
Typical Junction Capacitance (Note1),CJ:30pF
Typical Thermal Resistance (Note2),R(ja):20℃/W
Storage and Operating Junction Temperature, TSTG/TJ:-50 to +175℃
Note:
1.Measured at 1.0MHz and applied reverse voltage of 4.0Vdc
2.Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C board mounted
Popular Components