-
1. Why do we need AUTOSAR?
The reason why AUTOSAR is needed can be seen from the following three aspects.
Electronic technology is playing an increasingly important role in various parts ...[Details]
-
0 Introduction
With the development of automation and intelligence of measurement and control systems, sensors and instruments are required to be more accurate, more reliable, and have certain ...[Details]
-
1. Overview
In the application of electronics and automation technology, digital signal conversion to analog control signal output is a common problem in electronic design, but many microc...[Details]
-
The vector network analyzer has an offset compensation function, which is an extension of the calibration function. Its application scenario is to compensate for the loss and delay parameters of the ...[Details]
-
1 Introduction
MAX16801A/B and MAX16802A/B use constant current to drive HB LEDs in general lighting and display applications to provide the required control functions. MAX16801A/B is suitable...[Details]
-
This series of articles basically records my learning process. I am usually very busy, and I try to learn the most in the shortest time. Sometimes because I am too busy, many learning processes are i...[Details]
-
With the entire security industry moving towards high definition and the continuous promotion after the establishment of the HDcctv Alliance, HD cameras with HD-SDI interfaces have increasingly ent...[Details]
-
In order to adapt to the needs of fingerprint collection sensor devices and fingerprint identification systems developing in the direction of miniaturization and embeddedness, this article proposes a...[Details]
-
The basic principle of the self-excited feedback switching power supply is shown in the figure. When the input voltage is applied, the current flows to the base of the switch tube VTl through Rg, m...[Details]
-
On September 15, Paul Boudre, CEO of French semiconductor materials giant Soitec, told the Financial Times, "Europe has the ability to build an important, autonomous chip supply. But will it work? Th...[Details]
-
The standby mode of stm32 is the most power-saving mode of stm32. Almost all internal registers are powered off, and only the standby circuit and RTC parts are powered on. If all registers are powere...[Details]
-
The debate over the technical route of photovoltaic inverters has never stopped. Which one is more suitable for China's photovoltaic market? Century New Energy Network conducts market research ques...[Details]
-
18b20 reset function: bit ds18b20_reset(void)
{
bit bitbuf;
ds18b20=1;
//10us
TH0=0xff;
TL0=0xf6;
TF0=0;
while(!TF0);
ds18b20=0;
/...[Details]
-
Recently, Suzhou Zezhong New Energy Technology Co., Ltd. told reporters that in view of the protection of intellectual property rights and the protection of the property rights of product patent ow...[Details]
-
Editor's Note: National-level specialized, refined, innovative and small giant enterprises refer to high-quality small and medium-sized enterprises that are located in the core areas of the industrial...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD