U905 Catalog Section
A note from IDEC:
Due to continuous product improvements, specifications are subject to change without notice.
For up-to-date information, or to request a full copy of this catalog,
please visit us at
www.idec.com
Display Lights
LT1 Series — SignaLight
™
Light Towers
Display Lights with a Tower of Advantages
Base Mount
LT1 Series
B
Key features of the LT1 series SignaLight towers include:
• Custom configurations meet your specifications — simply
• Select your flash preference, lens colors, number of tiers, mounting
style, and voltage
• Choice of LED or incandescent lamps
LED lamps provide over 100,000 hours of service life and are
interchangeable with incandescent bulbs
Incandescent lamps (available up to 10 watts) are vibration-
resistant and provide a 2,000 hour service life
• Replace the bulbs independently; no need to disassemble the
entire unit
• Heat- and shock-resistant polycarbonate lenses
• Flashing models allow each lamp to be flashed or steady
• Choice of metallic base or cost-saving plastic base
• Color-coded wires make assembly and wiring easy
• Mounting options include base and pole mount
Pole Mount
(with “L” bracket)
UL Listed
File No. E70646
c - UL Listed
File No. E70646
(equivalent to CSA)
B-4
USA:
(800) 262-4332
or (408) 747-0550, Western Canada: (888) 578-9988 or Eastern Canada (888) 317-4332
Display Lights
Selection Guides
LT1 Series — LED or Incandescent Light Towers
LT1A
Page
Description
Incandescent
Steady
Flashing
Steady
Selection Guide
LT1D
B–4
LT1H
LED
LT1K
Flashing
B
Features
Nominal Voltage
Lamp Style
Lens Colors
Degree of Protection
Mounting
Optional Pole Height
Lens Diameter
• Select your flash preference, lens colors, base, number of tiers, mounting style, and voltage
• Replace the bulbs independently; there is no need to disassemble the entire unit
• Heat- and shock-resistant polycarbonate lenses
• Choice of metallic base or cost-saving plastic base
• Color-coded wires make assembly and wiring easy
12V AC/DC, 24V AC/DC , 120V AC , 240V AC (incandescent only)
T20 glass bulb, BA15D lamp base
Red, Yellow, Green, Blue, White
IP20 (for indoor use only)
Base mount (three stud)
Pole mount (horizontal or vertical surface)
NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit; install in an upright position
10.75" (273mm)
2.20" (56mm)
BA15D lamp base
Ratings/Approvals
UL Listed
File No. E70646
c-UL Listed
File No. E70646
(equivalent to CSA)
B-2
USA:
(800) 262-4332
or (408) 747-0550, Western Canada: (888) 578-9988 or Eastern Canada (888) 317-4332
Display Lights
LT1A: Incandescent, Non-Flashing
LT1D: Incandescent, Flashing/Non-Flashing
LT1H: LED, Non-Flashing
LT1K: LED, Flashing/Non-Flashing
Nominal Voltage
Internal Fuse Rating
Lamp
Rating
LED
Incandescent
12V AC/DC ±10%
3.15A
12V AC/DC
12V, 5W
24V AC/DC ±10%
3.15A
24V AC/DC
30V, 10W
120V AC ±10%
1A
120V AC
120V, 7W
240V AC ±10%
1A
N/A
240V, 10W
LT1 Series
B
Red
Current
Required
per Lamp
LED
12VDC
24VDC
120VAC
54mA
54mA
30mA
Green
78mA
39mA
30mA
Yellow
54mA
54mA
30mA
White
54mA
54mA
30mA
Blue
78mA
39mA
30mA
N/A
Incandescent
External Contact Capacity
In-Rush
Current
per Lamp
LED
Incandescent
LED
Incandescent
LED
Incandescent
0.4A ±10%
5A
Not applicable
Below 4.0A
BA15D lamp base
0.3A ±10%
5A
0.06A ±10%
2A
0.05A ±10%
1A
Below 3.0A
Below 0.6A
Below 0.5A
Specifications
Lamp
Style
Lamp
Life-Span
Lens Colors
T20 glass bulb, BA15D lamp base
100,000 hours (minimum)
2,000 hours (average)
Red, Yellow, Green, Blue, White
2.20" (56mm)
5
IP20 (for indoor use only), NEMA1
LED: 45/minute ±10% (LT1K only)
Incandescent: 80/minute ±10% (LT1D only)
More than 3M
Ω
by a DC 500V megger
1,500V AC for 1 minute
–30 to +40°C (LT1A), –10 to +40°C (LT1D), 15 to 90% relative humidity
2.2G maximum
Base mount (three stud)
Pole mount (horizontal or vertical surface)
NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit
Install in an upright position
10.75" (273mm)
Lens Diameter
Maximum Tiers
Degree of Protection
Flash Rate
Insulation Resistance
Voltage Resistance
Operating Range
Vibration Resistance
Mounting
Optional Pole Height
Approvals
UL Listed
File No. E70646
Non-flashing (steady): 20 AWG
Flashing: 18 AWG and 20 AWG
c-UL Listed
File No. E70646
(equivalent to CSA)
Wire Size
USA:
(800) 262-4332
or (408) 747-0550, Western Canada: (888) 578-9988 or Eastern Canada (888) 317-4332
B-5
Display Lights
SignaLight™ Part Numbers (assembled)
LT1 Series
Part Number Guide
LT1
A
–
3
5
3
–
R
Y
G
Color code
To determine the appropriate
SignaLight part number, use these
numbered boxes in conjunction
with the codes in the
Part Numbers:
Assembled Parts
table below.
Light source
and function
Number Voltage Mounting
of tiers
style and
base des-
ignation
B
Part Numbers: Assembled Parts
Description
Box No.
Non-flashing (steady),
incandescent lamp
Code
A
D
H
K
1–5
1
2
5
8
1
2
3
4
R
Y
G
S
W
Light source
and function
Flashing/non-flashing,
incandescent lamp
Non-flashing (steady),
LED lamp
Flashing/non-flashing,
LED lamp
Number of tiers
Maximum of 5 tiers
12V AC/DC
Voltage
24V AC/DC
120V AC
240V AC (incandescent only)
Base mount, plastic base
Mounting style and
base designation
Base mount, metallic base
Pole mount, plastic base
Pole mount, metallic base
Red
Yellow
–
Color code
Green
Blue
White
Specify lens color code from the lowest to the highest tier.
Examples: Assembled Parts
Part No.
Description
LT1A-354-RRR
LT1D-182-S
LT1D-221-RS
LT1H-412-RGYW
LT1K-554-GSRGR
Non-flashing incandescent, 3 tiers, 120V AC, pole-mount,
metallic base, all Red lenses
Flashing/non-flashing incandescent, 1 tier, 240V AC, base-
mount, metallic base, Blue lens
Flashing/non-flashing incandescent, 2 tier, 24V AC/DC,
base-mount, plastic base, Red and Blue lenses
Non-flashing LED, 4 tier, 12V AC/DC, base-mount, metallic
base, Red, Green, Yellow, and White lenses
Flashing/non-flashing LED, 5 tier, 120V AC, pole-mount,
metallic base, Green, Blue, Red, Green, and Red lenses
B-6
USA:
(800) 262-4332
or (408) 747-0550, Western Canada: (888) 578-9988 or Eastern Canada (888) 317-4332
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
