Multiple Output Frequencies (2, 3, or 4) - Selectable
Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz -
20 MHz)
Frequencies from 50 MHz to 1.4 GHz (LVDS/LVPECL/CML), and
10 MHz to 150 MHz (HCMOS)
Applications:
Where more than one selectable frequency is required for differ-
ent global regions, FEC (Forward Error Correction) or selectable
funcionality are required.
Telecommunications such as SONET / SDH / DWDM / FEC /
SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic flight controls and military communications
Corporate Headquarters
100 Douglas Avenue
PO Box 630
Yankton, SD 57078-0630
1-800-762-8800
www.mtronpti.com
Featuring
QiK Chip
TM
Technology
MtronPTI
Applications Note:
The M31x series is ideally suited for a wide range of applications, specifically applications where extremely
tight jitter performance is needed with a wide range of flexibility in the frequencies available. In video ap-
plications where line-rate timing-jitter is crucial, the QiK Chip M31x is a critical component of success for
the circuit design. Jitter performance and Phase Noise performance well exceed the required SMPTE
standards established for video applications.
In addition, the QiK Chip M31x product series provides multiple output frequencies from a single, highly
stable crystal. Using a standard 5x7mm package provides access to up to 4 arbitrary output frequencies
from the same oscillator, simplifying the performance-sensitive design testing and validation that requires
frequency margining.
Industry leading jitter and phase noise performance, reduction in testing costs, increased flexibility in reducing
PCB real estate for multiple output frequency demands, and an order to delivery time of less than 2 weeks,
provides engineering and production advantages that have not been available in a small 5x7mm package in
the past. The M31x produces outputs from 10MHz to 1.4GHz with unlimited margining increments. These
independent frequencies can be a few parts per million or hundreds of MHz apart.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
2
M31x Series
Multiple Frequency
LVPECL/LVDS/CML/HCMOS VCXO – 3.3/2.5/1.8 Volt – 5x7 mm
Product Features
•
•
•
•
•
•
•
Multiple Output Frequencies (2, 3, or 4) - Selectable
QiK Chip
TM
Technology
Superior jitter performance (less than 0.25 ps RMS, 12 kHz - 20 MHz)
APR from ±50 to
±300
ppm over industrial temperature range
SAW replacement - better performance
Frequencies from 50 MHz - 1.4 GHz (LVDS/LVPECL/CML)
Frequencies from 10 MHz to 150 MHz (HCMOS)
Product Description
The multiple frequency VCXO utilizes MtronPTI’s Qik Chip
TM
technology to provide a very low jitter clock for all
output frequencies. The M31x is available with up to 4 different frequency outputs from 10MHz through 1.4
GHz. Unlike traditional VCXO’s where multiple crystals are required for each frequency, the M31x utilizes a
rock solid fundamental 3rd overtone crystal and the Qik Chip
TM
IC to provide the wide range of output frequen-
cies. Using this design approach, the M31x provides exceptional performance in frequency stability, jitter,
Telecommunications such as SONET / SDH / DWDM / FEC / SERDES
/ OC-3 thru OC-192
1-2-4-10 Gigabit Fibre Channel
Wireless base stations / WLAN / Gigabit Ethernet
•
•
•
•
•
•
xDSL, Network Communications
Avionic flight controls
Military Communications
Clock and data recovery
Low jitter clock generation
Frequency margining
Product Ordering Information
M3120Sxxx, M3121Sxxx, M3122Sxxx
M3130Sxxx, M3131Sxxx, M3132Sxxx
M3140Sxxx, M3141Sxxx, M3142Sxxx
Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
3
M31x Series
Multiple Frequency
LVPECL/LVDS/CML/HCMOS VCXO – 3.3/2.5/1.8 Volt – 5x7 mm
Performance Characteristics
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
1-800-762-8800.
4
M31x Series
Multiple Frequency
LVPECL/LVDS/CML/HCMOS VCXO – 3.3/2.5/1.8 Volt – 5x7 mm
Phase Noise Plot
Output Waveform
Output Waveform: LVDS / CML / LVPECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI
[p=30, null, left][color=rgb(102, 102, 102)][font=微软雅黑][size=4]As the carrier of various components and the hub of circuit signal transmission, PCB has become the most important and critical part of e...
[size=5] [/size][size=4] In the SRIO debugging stage, there is a V6 and two 6678s interconnected through 4XSRIO, without a switch in the middle, and finally the communication between them is fixed. [/...
[i=s]This post was last edited by sigma on 2019-6-12 10:09[/i]"Control" is a major category in the National Undergraduate Electronic Design Competition. In the 11 electronic design competitions, "Cont...
Live broadcast today at 14:00: TI desktop DLP 3D printing, 3D scanning and industrial display applications based on DLP Pico technologyClick here to enter the live broadcastLive broadcast time: 14:00-...
Kelvin Four -terminal sensing is also known as four-terminal detection (4T detection, 4T sensing), four-wire detection or 4-point probe method. It is an electrical impedance measurement technology tha...
1 Introduction
As an emerging green energy source, solar energy has been rapidly promoted and applied with its incomparable advantages. It is generally believed that energy-saving la...[Details]
The Analog Devices AD8553 auto-zero instrumentation amplifier has a unique structure in which its two gain-setting resistors have no common node (Reference 1). The front stage of the IC is a precisio...[Details]
1. Overview:
Power electronics technology uses power semiconductors and their circuits to achieve power conversion and control technology. It has many typical applications in various aspects o...[Details]
Description of the program:
The Profibus-DP slave port of netTAP30-DPS is connected to the DP fieldbus network, and the RS485 lead-out core wire is connected to the serial port devices on the ...[Details]
Today, iQOO's official Weibo account announced that the iQOO Pro new product launch conference will be held in Beijing on August 22, which means that the launch of iQOO Pro is officially on the agend...[Details]
When you sit down to choose the right operational amplifier (op amp) for your
circuit
, the first thing to do is to determine the bandwidth of the signal that your system will run throug...[Details]
Typically, the biggest obstacle encountered when designing an isolated DC-DC converter is transformer design, which often discourages designers from doing so and leads to other simpler design tasks. B...[Details]
When you call many customer service, you will definitely hear the following dialogue: "For your protection, your call may be recorded." But do you know how to record it? With a recorder placed next...[Details]
At the Tianfeng Securities Spring Forum Semiconductor Exchange Conference, Saiwei Semiconductor Board Secretary and Deputy General Manager Zhang Abin said that under the background of the COVID-19 ep...[Details]
China Energy Storage Network News:
At 9:00 on January 17, Jin Jin, product development manager of the Energy Big Data Center of State Grid Qinghai Electric Power Company, opened the company...[Details]
In real driving scenarios, observation and interaction enable the driving car to accumulate knowledge and cope with unpredictable situations. We call this way of operating the world for intelligent...[Details]
1. Read the instructions carefully before use to clarify whether it is AC or DC dual-use. 2. The voltage of the measured circuit cannot exceed the value indicated on the clamp meter, otherwise it is ...[Details]
In one of my products, there are two chips, AVR and PIC, at the same time. When AVR drives the relay, then drives the contactor. PIC is used for display. I found that PIC actually has a little interfe...[Details]
In the past, it was simply believed that lightning strikes damaged distribution transformers because lightning waves entered the high-voltage windings. In fact, this understanding is somewhat one-side...[Details]
State Grid Electric Vehicle Service Co., Ltd. Xie Changwei
Energy transformation is a systematic social project. The development of a better society in the future cannot be separated from the ...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
