CRCW1210683JRT2-PB

1. External interrupt 1.1 Interruptions The concept of interrupts has been mentioned in the previous blog. (Portal: 51 MCU Getting Started Tutorial (5) - Timer Interrupts) An interruption means th...[Details]

In the previous article on the PWM drive principle of brushed DC motors, a current regeneration method based on short circuiting the two ends of the motor was introduced. In fact, there are other c...[Details]

Preface: When we do C language programming, we often use the printf function to print out and debug the code. However, this printf function C library has already implemented it for us, and usually we...[Details]

Note that the signal response at 90° is 6 dB lower than the signal response at 0°, and that its maximum output level is at zero frequency. An equalization filter is often applied to the output of t...[Details]

According to foreign media reports, with the joint efforts of researchers from Pennsylvania State University and the University of Electronic Science and Technology of China, a powerful and sustainab...[Details]

1 Introduction At present, large-capacity cable harnesses are widely used in high-end fields such as automobiles, ships, and aerospace. In order to ensure the safe and reliable use of cable harnesses...[Details]

Go to Taobao, buy a house, a car, and a plane... Available online, priced at 2.39 million In 2024, along with the “humanoid robots ”, the “low-altitude economy” was also inclu...[Details]

Each musical instrument has its own unique spectrum and timbre. If you want to improve your ability to appreciate music, you must do more listening comparisons, that is, when playing a piece of mus...[Details]

Use ordinary timer 2 to generate interrupt, counting method: count up! 1. Programming configuration part 1. First, configure the interrupt. The timer interrupt must be configured. The code is as foll...[Details]

According to foreign media reports on December 22, the performance report of storage giant Micron showed that as of November 30, revenue was US$4.73 billion, which was better than the market estimate...[Details]

TMS320VC5402 is TI's fifth-generation DSP, a low-power DSP chip specifically based on digital signal processing, with an operating frequency of up to 10ns, and is widely used in digital...[Details]

　　As electronic products become faster and more complex, they become more difficult to design, verify, and debug. Designers must fully verify their designs to ensure reliable product operation. When p...[Details]

With the continuous development of differentiated product competition in the market, user experience has become the pursuit of smart product designers. Following the traditional plug-in self-lockin...[Details]

LED (Lighting Emitting Diode) lighting is light-emitting diode lighting, which is a semiconductor solid-state light-emitting device ... LED (Lighting Emitting Diode) lighting is...[Details]

Spice is a powerful general-purpose analog circuit simulator and a circuit analysis program mainly used to simulate integrated circuits. In the Spice program, there are two methods to establish device...[Details]