The EML30 is a series of open frame and encapsulated AC-DC single output power supplies
designed for medical applications. The series provides a number of flexible mechanical options
including PCB mount, open frame, chassis mount with screw terminals and a DIN Rail option. With
approvals to world-wide medical safety standards, compliance with class B for both conducted and
radiated emissions and a 130%, 30s peak load capability, these class II isolation parts benefit
system designers with easy integration into the latest healthcare products and applications.
EML30:
(-P
):
2.96 x 1.36 x 1.05” (75.2 x 34.6 x 26.7 mm)
(-T
):
3.46 x 1.36 x 1.00” (87.9 x 34.6 x 25.4 mm)
(-E
):
3.10 x 1.50 x 1.10” (78.7 x 38.1 x 27.9 mm)
(-S): 3.78 x 1.57 x 1.12” (96.0 x 40.0 x 28.5 mm)
Models & Ratings
Output Power
20 W
30 W
30 W
30 W
30 W
30 W
30 W
30 W
Output Voltage
3.3 VDC
5.0 VDC
9.0 VDC
12.0 VDC
15.0 VDC
24.0 VDC
36.0 VDC
48.0 VDC
Output Current
Nominal
6.00 A
6.00 A
3.33 A
2.50 A
2.00 A
1.25 A
0.83 A
0.62 A
Peak
(1)
7.80 A
7.80 A
4.33 A
3.25 A
2.60 A
1.63 A
1.08 A
0.81 A
Model Number
(2,3)
EML30US03
EML30US05
EML30US09
EML30US12
EML30US15
EML30US24
EML30US36
EML30US48
Notes
1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal.
2. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals.
3. A Screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’, e.g. EML30US24-SD, DIN rail mounting kit is available as a seperate item,
order code ECL25/30 DIN CLIP.
Summary
Characteristic
Input Voltage Range
No Load Input Power
Efficiency
Operating Temperature
EMC
Safety Approvals
79
-20
Minimum
85
120
Typical
Maximum
264
370
0.3
88
+70
Units
VAC
VDC
W
%
°C
Derate linearly from 100% at +50 °C to 50% at +70 °C
Notes & Conditions
Derate from 100% at 90 VAC to 90% at 85 VAC
EN55032 Level B Conducted & Radiated, EN61000-4, EN61000-3, EN60601-1-2
EN60601-1, ANSI/AAMI ES60601-1. IEC60601-1
1
www.xppower.com
EML30 Series
Input
Characteristic
Input Voltage Range
Input Frequency
Input Current - Full Load
No Load Input Power
Inrush Current
Earth Leakage Current
Input Protection
20/40
Minimum
85
47
0.55/0.32
0.3
Typical
Maximum
264
63
AC-DC Power Supplies
Units
VAC
Hz
A rms
W
A
Notes & Conditions
At 115/230 VAC
At 115/230 VAC
Class II construction no earth
Internal T2.0 A/250 VAC fuse fitted in line and neutral
Output
Characteristic
Output Voltage
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Start Up Rise Time
Hold Up Time
Line Regulation
Load Regulation
Transient Response
12
±0.5
±1
4
50
Ripple & Noise
195
115
120
120
200
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
0.05
%/˚C
216
140
185
0
2
14
Minimum
3.3
Typical
Maximum
48
±1
±5
Units
VDC
%
%
A
s
ms
ms
%
%
%
mV pk-pk
mV pk-pk
mV pk-pk
% Vnom
% Vnom
%
Trip & Restart (hiccup mode)
Deviation, recovery within 1% in less than 500 µs
for a 25% load change
3.3-5 V versions, 20 MHz bandwidth
12-15 V versions, 20 MHz bandwidth
24-48 V versions, 20 MHz bandwidth
3.3 V versions, recycle input to reset
All other versions, recycle input to reset
at full load and 115 VAC
Not encapsulated units
No minimum load required
Notes & Conditions
General
Characteristic
Efficiency
Isolation: Input to Output
Switching Frequency
Power Density
Mean Time Between Failure
Weight
>400
0.13 (60)
0.35 (160)
0.37 (170)
Minimum
79
4000
70
7
Typical
Maximum
88
Units
%
VAC
kHz
W/in
3
kHrs
lb (g)
lb (g
lb (g
PCB Mount version
MIL-HDBK-217F, +25 °C GB
Open frame versions
Encapsulated version
Screw terminal version
Notes & Conditions
Environmental
Characteristic
Operating Temperature
Storage Temperature
Cooling
Humidity
Operating Altitude
Shock
Vibration
95
3048
IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes
IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle
%RH
m
Minimum
-20
-40
Typical
Maximum
+70
+85
Units
°C
°C
Convection-cooled
Non-condensing
Notes & Conditions
Derate linearly from 100% at +50 °C to 50% at +70 °C
It is required to be able to output 1-5Hz square wave, triangle wave and sine wave signals. The frequency of the output signal can be adjusted from 1-5Hz, and the frequency of the current signal is di...
Writing C programs in a certain style can help the C compiler generate faster ARM code. Here are some key points related to performance: 640?wx_fmt=png&wxfrom=5&wx_lazy=1 1. Use signed and unsigned in...
I am a novice. I have read many posts recently and understand why BUCK needs floating ground driver. But it is strange that when simulating with Multisim and Saber, the simulation is successful withou...
[i=s]This post was last edited by Li Baiyi on 2019-5-16 22:27[/i] I was selected in the third batch and finally got the board. Thanks to EEWORLD and GigaDevice! {:1_144:} GD32E231C_START comes with a ...
The I2C bus consists of two bidirectional signal lines, the data line (SDA) and the clock line (SCL), which are pulled up by resistors to achieve switching between high and low levels and exchange dat...
PPM is the abbreviation of part per million , which means parts per million. It is a unit of precision for quartz crystal oscillators. 1PPM stands for one part per million ,representing error (precisi...
Introduction Data from industry experts such as PROCENTEC show that applications based on RS-485 fieldbus technology (PROFIBUS®) continue to grow, and industrial Ethernet (PROFINET) applications a...[Details]
A common problem encountered in electronic design is the testing of the transmission characteristics of the circuit under test (DUT). The transmission characteristics here include gain and attenuatio...[Details]
In the process of electrical measurement, measurement errors will certainly occur due to various reasons. The existence of measurement errors is inevitable and universal. People can only limit them w...[Details]
According to Jiwei.com, Apple released its second quarter financial report for fiscal year 2019 ending March 30 on Tuesday. The report shows that Apple's second quarter revenue was $58 billion, down ...[Details]
When measuring current, you must pay attention to the most important point. Do not confuse the method of measuring current with the method of measuring voltage, because many novices use the same meth...[Details]
The 10th China International Petrochemical Conference (CPCIC) was successfully held in Hangzhou, Zhejiang. During the conference, the international diversified chemical company Saudi Basic Industries...[Details]
Apple has made a lot of moves. They suddenly launched the 2019 education discount, quietly updated the MacBook Air and MacBook Pro, and also lowered the price of upgrading hard drives in the Mac seri...[Details]
Recommended books: Keil Cx51 V7.0 single .. practice ARM7 ARM Embedded System Basics Tutorial Embedded Linux Application Development Manual Windows CE Embedded System Windows CE embedded advanced pro...[Details]
On September 19th in San Jose, California, the United States, the 2023 Intel ON Technology Innovation Conference officially opened. This is the third time Intel has held an on technology innovation c...[Details]
(Image source: Paper on Intelligent Vehicle Monitoring System in Highway Traffic) According to foreign media reports, keeping a close eye on traffic flow on highways is beneficial in many ways, ma...[Details]
I feel that the programs I write every day are becoming more difficult, or maybe it's because I'm too impatient. I think some of the transitional programs in the book are too simple, so I just read t...[Details]
The power module is a device that simplifies circuit design. Simply mount the power module on a circuit board and it can be used as a power supply. There are various DC-DC power modules on the mark...[Details]
Recently, China Construction Bank news showed that China Construction Seventh Engineering Bureau successfully won the bid for the general contracting project of the Western Semiconductor Integrated C...[Details]
A typical DIN wear tester uses a rotating steel drum moving at a fixed rate with emery paper having a certain abrasive force on it. The test head of the tester contains the sample of interest, which i...[Details]
In our previous blog notes, we have explained how improving the efficiency of electric vehicle powertrains can increase their range (Note I) and how better software controlling inverters and electr...[Details]