8T6C24F61AC

　　VR vision is different from the way we usually use our eyes. It is two eyes looking at their own lenses. Although there is only one screen, there are two light source paths, so the contraction of t...[Details]

0 Introduction Since May 2010, Guangzhou Institute of Metrology and Testing Technology has joined hands with the Sports Facilities Testing Center of Beijing Hua'an Joint Certification...[Details]

Lighting up the LED should be the first experiment for everyone to learn hardware! From 51 to 32 and then to ARM, let's stop talking nonsense and start using STM32 to light up the LED.  GPIO: also kn...[Details]

1 Introduction With the rapid development of microelectronics technology, embedded products have been rapidly promoted and achieved great success due to their natural human-computer intera...[Details]

The interrupt processing is divided into three parts: 1. Interrupt detection: Under the arm architecture, the code for the interrupt monitoring part needs to be developed by the user. You can refer ...[Details]

In recent years, with the rapid development of technologies such as 5G and artificial intelligence and the transformation and upgrading of factory intelligence, the application of AMR (Autonomous M...[Details]

void TIM4_TimerInit(u8 Timer4Time) {   assert_param(IS_TIM4TIMERTIME_OK(Timer4Time));       TIM4_DeInit(); //Reset all parameters of TIM4   TIM4_TimeBaseInit(TIM4_PRESCALER_16,Timer4Time); //16M/16= ...[Details]

        1. ECT module introduction         The enhanced capture timer module (ECT) of the XEP100 microcontroller is a timer module developed by adding some functions on the basis of the standard time...[Details]

Bend and cut feet due to design requirements When bending and cutting the LED pins, the position of the bending and cutting pins should be greater than 3mm from the bottom surface of the col...[Details]

       The Honor Magic V foldable screen phone has been officially announced. It is expected to adopt an inward folding design, and the release date is yet to be determined. 　　According to digital bl...[Details]

In the previous video, we have introduced the ROLL mode in the horizontal time base. Now let’s take a look at the XY mode in the horizontal time base. What is it all about? In the previous video, w...[Details]

Among the commonly used A/D conversion chips (such as ADC0809, ICL7135, ICL7109, etc.), ICL7135 is different from the others. It is a four-and-a-half-bit dual-integral A/D converter with high precisio...[Details]

       On January 12, Sina's "2020 Technology Billboard" annual ceremony officially opened today. Due to the epidemic, all activities of this year's Technology Billboard were held online. 　　The the...[Details]

A voltage-stabilized power supply circuit with a 7-shaped overcurrent protection circuit The figure shows a voltage-stabilized power supply circuit with a 7-shape...[Details]

0. Write in front 3D object detection is a very important basic task for autonomous driving. Today, I would like to recommend a recent review of 3D object detection. 2. Summary ...[Details]