SQUARE FLANGE RECEPTACLE
Parameter Name | Attribute value |
Component type | electrical connector |
Connector System | line to panel, line to panel |
Sealable | yes |
Connectors and terminals terminate to | Wires and cables |
Housing size | 17 |
shield | yes |
Connector type | female end, female end |
Housing type | Square flange female end |
Number of Positions | 8 |
Number of power supply locations | 8 |
Number of signal positions | 0 |
Pre-installed | no |
position keying | A |
keying | Keyway polarization A |
Factory installed rear case | no |
Operating voltage (VAC) | 900 |
Voltage (Vrms) | 2300 |
Operating voltage (VDC) | 1250 |
Penetration type | no |
Entrance method | Back penetration |
Shell plating material | electroless nickel plating |
Shell material | composite |
Insulation Materials | Hard dielectric/silica gel |
Sealed | no |
Fluid type | M2-V, MIL-DTL-5624 (JP-4,JP-5), MIL-DTL-83133 (JP-8), MIL-PRF-23699, MIL-PRF-5606, MIL-PRF-7808, SEA |
Environmental protection type | Elastomeric seal |
O-ring material | Silica gel |
weight | 19.1 g [ .0422 lb ] |
environmental protection | yes |
Perimeter sealing material | Silica gel |
Contact Current Rating (Max) (A) | 13 |
reverse polarity | no |
Terminal layout | E08 |
Terminal type | Pin |
Number of terminals (size 16) | 8 |
Panel Mount Feature Type | square flange |
Panel mount features | with |
Connector mounting type | Panel |
polar code | A |
Joint alignment type | keying |
joint fixation | with |
flange | square flange |
Joint fixation type | Three-head thread |
Location monitoring | Timing |
Component length | 31.5 mm [ 1.24 in ] |
Cable size | .52 – 1.31 mm² [ 20 – 16 AWG ] |
Acceptable wire insulation diameter range | 1.65 – 2.77 mm [ .065 – .109 in ] |
Working group temperature range | -65 – 200 °C [ -85 – 392 °F ] |
fluid resistance | yes |
Circuit Application | Power |
Durability Level (Cycles) | 500 |
Package quantity | 1 |
Ignored load location | all |