Ball Grid Array
(BGA) Adapters
5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 • Fax 401-823-8723 • Email info@advintcorp.com • Internet http://www.advintcorp.com
BGA Adapters
Standard Adapter (A):
• Mates with Standard Socket (S)
• Adapter size equals BGA Device
body + .079/(2.0)
Extraction Slot Adapter (AX):
• Slots allow AIC extraction tool (sold
separately) to easily remove device/
adapter assembly from socket.
• Mates with Extraction Socket (SB)
or Guide Post Socket (SG)
• Adapter size equals the BGA
Device body + .157/(4.0)
Features:
• Soldering BGA Device to adapter subjects
BGA to less thermal stress than soldering
BGA directly to a PCB due to the adapter’s
lower mass.
• Uses same footprint as BGA device.
• Custom adapters available for heat sink
attachment.
BGA Body + .079/(2.0)
.039/(1.0)
BGA Device
BGA Body + .157/(4.0)
.079/(2.0)
BGA Device
BGA Adapter Extraction Tool:
• Insert “T” bar end of tool into extraction slot adapter.
• Slide tool to end of slot and pry adapter from socket.
• Repeat in additional slots until adapter is separated from socket.
Device Package Size
< 1.024 (26mm) > 1.024 (26mm)
Tool P/N
5566
.373/(9.5mm)
5504
.675/(17.1mm)
Terminals:
Brass - Copper Alloy (C36000),
ASTM-B-16
Plating:
G - Gold over Nickel
Body Material:
FR-4 Glass Epoxy, U.L. Rated 94V-O
P/N 5504
P/N 5566
Blade Width
Blade Width
How It Works:
1.27mm & 1.5mm Pitch
Type -638
DEVICE
Terminals
1.0mm Pitch
Type -715
0.80mm Pitch
Type -700
0.75mm Pitch
Type -757
ADAPTER
Reflow (solder) BGA
Device to Adapter
.182
(4.62)
.159
(4.04)
.146
(3.71)
.142
(3.61)
.018
(0.46) Dia.
.011/(0.28)
Dia.
.011
(0.28)Dia.
.008
(0.20)Dia.
SOCKET
Reflow (solder)
Socket to PCB
How To Order
1
F
G
A
XXX -638
G
Terminal Plating
G - Gold
Terminal Type
Number of Positions
*See BGA Footprint Section or web site
Model Type
A
= Standard Adapter
AX
= Extraction Slot Adapter
(1.5, 1.27, 1.0mm Pitch only)
Footprint Dash#
If Applicable*
Body Type
F - FR-4
Pitch
B = .059/(1.5mm)
G = .050/(1.27mm)
H = .039/(1.0mm)
J = .0315/(0.80mm)
K = .0295/(0.75mm)
PC BOARD
inch/(mm)
Products shown covered by patents issued and/or pending. Specifications subject to change without notice.
Page 4
京公网安备 11010802033920号
EEWORLD
