NOT RECOMMENDED
FOR NEW DESIGN
UG2001 - UG2007
2.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER
Features
•
•
•
•
•
Glass Passivated Die Construction
Ultra-Fast Switching for High Efficiency
Surge Overload Rating to 60A Peak
Low Reverse Leakage Current
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
•
•
•
•
•
•
•
•
•
Case: DO-15
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020D
Terminals: Finish - Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band
Marking: Type Number
Ordering Information: See Page 3
Weight: 0.4 grams (approximate)
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
Average Rectified Output Current @T
A
= 55°C (Note 1)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Symbol
V
RRM
V
RWM
V
R
V
R(RMS)
I
O
I
FSM
UG2001 UG2002 UG2003 UG2004 UG2005 UG2006 UG2007 Unit
50
35
100
70
200
140
400
280
2.0
60
600
420
800
560
1000
700
V
V
A
A
Thermal Characteristics
Characteristic
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Symbol
R
θ
JA
T
J,
T
STG
Value
50
-55 to +150
Unit
°C/W
°C
Electrical Characteristics
Characteristic
Forward Voltage
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
Typical Total Capacitance (Note 2)
Reverse Recovery Time (Note 3)
Notes:
1.
2.
3.
4.
5.
@T
A
= 25°C unless otherwise specified
Symbol
V
F
I
R
C
T
t
rr
UG2001 UG2002 UG2003 UG2004 UG2005 UG2006 UG2007 Unit
1.0
1.3
1.7
V
5.0
μA
100
30
15
pF
50
75
ns
@ I
F
= 2.0A
@ T
A
= 25°C
@ T
A
= 100°C
Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Measured with I
F
= 0.5A, I
R
= 1.0A, I
rr
= 0.25A. See figure 5.
EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
Short duration pulse test used to minimize self-heating effect.
UG2001 - UG2007
Document number: DS27009 Rev. 5 - 3
1 of 4
www.diodes.com
October 2010
© Diodes Incorporated
NOT RECOMMENDED
FOR NEW DESIGN
I
(O)
, AVERAGE FORWARD RECTIFIED CURRENT (A)
UG2001 - UG2007
I
F
, INSTANTANEOUS FORWARD CURRENT (A)
10
2.0
1.6
1.2
1.0
0.8
0.1
0.4
Single phase half-wave
60Hz resistive or inductive load
0
25
50
75
100
125
150
175
200
0.01
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
T
A
, AMBIENT TEMPERATURE (
°
C)
Fig. 1 Forward Current Derating Curve
60
I
FSM
, PEAK FORWARD SURGE CURRENT (A)
C
T
, TOTAL CAPACITANCE (pF)
100
V
F
, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
40
UG2005
UG2001 -
UG2004
10
20
T
j
= 25
°
C
f = 1.0MHz
0
1
10
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
100
1
1
10
V
R
, REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance
100
(+)
(-)
UG2001 - UG2007
Document number: DS27009 Rev. 5 - 3
2 of 4
www.diodes.com
October 2010
© Diodes Incorporated
NOT RECOMMENDED
FOR NEW DESIGN
UG2001 - UG2007
Ordering Information
Part Number
UG2001-T
UG2002-T
UG2003-T
UG2004-T
UG2005-T
UG2006-T
UG2007-T
Notes:
(Note 6)
Case
DO-15
DO-15
DO-15
DO-15
DO-15
DO-15
DO-15
Packaging
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
4K/Tape & Reel, 13-inch
6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Package Outline Dimensions
Dim
A
B
C
D
DO-15
Min
Max
25.40
⎯
5.50
7.62
0.686
0.889
2.60
3.60
All Dimensions in mm
UG2001 - UG2007
Document number: DS27009 Rev. 5 - 3
3 of 4
www.diodes.com
October 2010
© Diodes Incorporated
NOT RECOMMENDED
FOR NEW DESIGN
UG2001 - UG2007
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
UG2001 - UG2007
Document number: DS27009 Rev. 5 - 3
4 of 4
www.diodes.com
October 2010
© Diodes Incorporated
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
