Electronic trip unit circuit
Source: InternetPublisher:张三叔 Keywords: contact coil Updated: 2020/04/19
Both DK-5AD and 5DD control boxes use electronic releases, and their electrical appliances are shown in Figure 6-81. The tripper has overload long
delay, overload short delay, short circuit instantaneous, current limiting, undervoltage and other protection functions. In the figure, TA is a current-to-voltage converter.
rc is the power transformer, S is the shunt button, SB2 is the reset button, SB3 is the test button, C is the zero voltage delay timer
, Q is the undervoltage trip coil , L is the leakage locking contact , and F is the shunt Trip coil , QF is the auxiliary contact of the circuit breaker .
- Perform surgery on the speaker protection circuit
- Squirrel cage asynchronous motor reverse braking control circuit
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Design and principle analysis of practical electric curtain remote control device
- Do-it-yourself trial production of phase failure protection device
- Simple three-phase motor phase loss protection circuit
- Guanghua brand anti-theft doorbell electronic lock circuit
- Simple disconnection burglar alarm
- Practical electric curtain remote control device
- Analysis of the working principle of a sequential control circuit
- Homemade disinfectant circuit
- Multi-channel patrol detection control circuit b
- Micro remote control receiving and control circuit
- fire smoke control circuit
- Infrared voice control circuit
- Chandelier control circuit
- Typical operation display circuit
- Relay control circuit a
- Electric heater temperature detection control circuit
- Inverter brightness control circuit