Lights out method and merging line b
Source: InternetPublisher:ghaytweyhtoo Keywords: line generator BSP Updated: 2021/11/26
Combining the electricity from one generator
with the electricity from other generators (or grid system) to achieve
joint operation is called parallel (or grid-connected) operation. Before the generators are put into parallel operation, they must meet
four conditions: the same phase sequence, the same or similar voltage, the same or similar frequency, and the same voltage phase.
The light extinguishing method is also called the dark light method, which is a quasi-synchronous method. The circuit is shown in Figure 7-4. It uses three sets of light bulbs to indicate the frequency and phase sequence of
the two generators .
- Current output characteristics of brushed motor driver chips. How to increase the peak drive current?
- The meaning and importance of circuit protection, common types of circuit protection
- Peripheral circuit of automotive motor controller power supply chip
- Build a glove-controlled robotic arm
- DIY an electromagnetic levitation device
- How can we make the robot move precisely on a predefined path?
- How to Make a Hot Tub Smart and Remotely Operated with a Raspberry Pi
- Replace the GE LOGIQ a200 ultrasound measurement key with a self-made touch switch
- Water supply reminder after water outage
- Vibration anti-theft alarm circuit
- Excellent performance household inverter power supply circuit
- soil content measurement circuit
- Peanut and melon seeds roasting machine circuit
- Particle clogging alarm circuit of wheat seeder
- Wien bridge oscillator circuit
- Parallel crystal oscillator
- Wireless microphone circuit
- High and low frequency signal generator circuit
- Three primary color display circuit
- Sawtooth wave generator circuit (1)