Voltage-current converter constructed with XTR110
Source: InternetPublisher:aytwartoofyoroo Keywords: Converter Updated: 2024/08/16
As shown in the figure, when the output current exceeds 40mA, the internal 50Ω resistor (R9) of XTR110 needs to be replaced by an external resistor REXT, and REXT is connected between pins 13 and 16. REXT = R9 (original span / required span). For example, in the figure, the original span of XTR110 is 20mA, and the required span is now 10A, R9 = 50Ω, then REXT = R9 = 50 × (20/10000) = 0.1Ω.
- Basic characteristics of power field effect tubes, how to improve the dynamic performance of power MOSFET
- 220V Remote Load Monitor
- Energy-saving motorcycle rectifier regulator
- Step-down power supply for driving relays
- What kind of circuit is a voltage regulator circuit?
- ISO113 circuit that can reduce power consumption
- Recommended circuits for different power on times of LM4911
- Offline 8w LED Flyback Power Supply with PFC using NCP1014
- Power supply circuit that can reduce LM317 ripple
- Reconstruction of the tube pre-stage by using low voltage difference power supply
- MC3406A inverting DC-DC integrated converter
- Laser power circuit
- Dual adjustable power circuit
- 3-phase CPU power circuit using HIP6301 and HIP6601 chips
- Touch switch circuit using frequency-voltage converter
- Printed circuit diagram of power converter
- Using magnetic transducer as position signal detection device circuit
- Basic circuit diagram of V,F converter
- Photodiode Current to Voltage Converter
- 5V step-down converter