Can type FM radio circuit diagram
Source: InternetPublisher:fish001 Keywords: Radio circuit machine circuit diagram FM radio Updated: 2021/08/05
The radio not only has good listening effect, but can also be used as a decoration around the neck. The machine is powered by two AA batteries. When the voltage is as low as 1.8V, the radio effect is still very good. In the figure, L1 and C5 are used to select the radio station. The high-frequency signal is sent into the circuit (pin 12) by the earphone lead that also serves as the antenna. The audio signal output from pin 14 is amplified by V1 and V2 for low frequency and then drives the earphone. L1 uses 0.6mm enameled wire to wind 6 turns around the frame of 3, and then takes off the frame to make a bodiless coil. C1 uses a small single-connected variable capacitor, and the rest use small ceramic capacitors. V1 and V2 use imported pipe K9014.
ck="window.open(this.src)" alt="Click to see a larger image" />
- Circuit principle and production of six-tube radio
- Homemade modified machine with 4 LNB inputs and audio and video outputs
- Production of a FM wireless microphone
- RF2942 I/Q 915 MHz Transmitter
- XEl209 70~30 kHz Ultra-Low Power CMOS Transceiver
- MICRFl03 ASK 1 GHz~800 MHz Transmitter
- XE1203 FSK 915/868/433 MHz Transceiver
- rfRXD0920 ASK/FSK/FM 930~800 MHz Receiver
- MAX2440/MAX2441/MAX2442 900 MHz Receivers
- Two-meter, two-watt FM phase-locked transmitter
- High power IGBT high frequency inverter welding machine circuit diagram
- Homemade small telephone program-controlled switch circuit diagram
- How to help teenagers install radio circuits
- Transmitter circuit diagram
- AM/FM radio circuit using three integrated circuits
- AM/FM high-quality radio circuit using TDA1220A
- Baiju SHJJ-1 multifunctional food processor circuit diagram
- Bailing YP5-5C automatic range hood circuit diagram
- LA1816 stereo radio circuit
- Walkman radio circuit diagram