The motor is equipped with a high-sensitivity comprehensive protection circuit
Source: InternetPublisher:酷到被通缉 Keywords: Protection circuit motor relay Updated: 2020/06/23
Working principle of the circuit: According to the actual situation that the winding will heat up first before the motor burns out, a small thermal relay
is installed on each phase winding of the motor , and the two
thermal relays are connected in series. As long as the winding temperature reaches the thermal relay Curie point temperature
(95℃), the thermal relay will automatically disconnect for protection.
The winding temperature of the motor during normal operation is much lower than the starting temperature of the thermal relay , so major electrical accidents can be avoided
.
- Analysis of the working principle of car garage door lights
- Model rocket launch controller circuit
- How to Make a Simple 2-Step Arduino Programmable Timer Circuit
- Tutorial for building a remote-controlled Arduino Air-Boat
- How to make a wheeled self-balancing robot using ultrasonic sensors
- Working principle of one Xipu STR soft starter controlling two motors
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Motor self-starting circuit
- Magnetic door and window anti-theft alarm
- Water supply reminder after water outage
- Resistive Neutral Leakage Protection Circuit
- Low voltage circuit breaker protection circuit b
- Thyristor silicon stack protection circuit c
- Overvoltage and overcurrent protection circuit
- Motor protection circuit
- Voltage type leakage protection circuit
- Thyristor overcurrent protection circuit 5
- Mains undervoltage and overvoltage protection circuit three
- Diesel generator speed protection circuit
- Water resistor anti-speed protection circuit
京公网安备 11010802033920号