AD16 copper plating problem

平漂流

AD16 copper plating problem [Copy link]

As shown in the picture, after AD16 copper is laid, there will be two different spacings. How to set them?

qwqwqw2088

AD16 is not used. Check whether there are multiple spacings in the copper plating rules. Delete the unused spacings and set other versions. Generally, the default normal spacing of the system is the system clearance (10mil). The spacing less than 10mil should be the newly created spacing.

平漂流

qwqwqw2088 posted on 2018-7-6 10:39 AD16 is not used. Check whether the copper plating rule has multiple spacings. Delete the unused spacing settings. The default normal spacing of other versions is generally...

It has been understood that one is the pad expansion spacing (10mil in the figure) and the other is the copper plating spacing (8mil in the figure). The pad expansion spacing rule is modified in rule--plane---polygon connect---air gap width. The copper plating spacing is modified in clearance (specific operation https://blog.csdn.net/bestBT/article/details/54934013)

平漂流

It is known that one is the pad expansion spacing (10mil in the figure), and the other is the copper spacing (8mil in the figure). The pad expansion spacing rule is modified in rule--plane---polygon connect---air gap width. The copper spacing is modified in clearance (for specific operations, you can search "AD16 to establish copper spacing rules" on Baidu)

平漂流

qwqwqw2088 posted on 2018-7-6 10:39 AD16 is not used. Check whether the copper plating rules have multiple spacings. Delete the unused spacing settings. The default normal spacing of other versions is generally...

I have learned that one is the pad expansion spacing (10mil in the figure) and the other is the copper plating spacing (8mil in the figure). The pad expansion spacing rule is modified in rule--plane---polygon connect---air gap width. The copper plating spacing is modified in clearance (for specific operations, you can Baidu "AD16 establish copper plating spacing rules")

qwqwqw2088

Pingpiaoliu published on 2018-7-6 14:40 I have learned that one is the pad expansion spacing (10mil in the figure) and the other is the copper spacing (8mil in the figure). The pad expansion spacing rule is in rule--p ...

I know, thank you for sharing the experience of establishing copper spacing rules for AD16