[Yichuang ETEB-6001DPX Review] GPIO Test Comparison

常见泽1

[Yichuang ETEB-6001DPX Review] GPIO Test Comparison [Copy link]

 

Got the development board

Let’s get the development environment ready first

Universal KEIL, no problem, install the PACK package

After installation, there is a driver package, but after plugging in the development board, there is no requirement to install the driver. It may be similar to the previous DAP.

After plugging in the USB, find the DAP emulator

Find the chip core

The overall opening project is very similar to the ST model.

For engineers engaged in the development of STM32 and other microcontrollers, it is relatively easy to get started

ET MCU

STM32 MCU

ET has an additional output current strength

STM32 can be configured with OD or PP

As for the initialization function, I feel that ET is not very convenient

Because GPIO2_4 needs to be configured as GPIO, Yu Luo selects MODE3

You must find this PIN to initialize. STM32 just needs to know whether it is GPIOA or B.

Find the burning algorithm

Start debugging

Jacktang

Open the project and it is very similar to the ST model, which means the imitation is still possible.

常见泽1

Jacktang posted on 2024-10-25 07:28 The overall opening project is very similar to the ST model, which means that the imitation is still possible

This shows that the ST model is deeply rooted in people's hearts.