[RTT & Infineon PSoC6 evaluation board (with touch)] 6, Slide slider control LED

ddllxxrr

[RTT & Infineon PSoC6 evaluation board (with touch)] 6, Slide slider control LED [Copy link]

It is really easy to control the LED with a slider in RTT.

First, create a new development board example with LED driver. Then comment out the LED flasher.

Open RT-Thread Settings and enable Slide in hardware

Then check if PWM is turned on in the component. I think this is related, that is, as long as the Slider is enabled

PWM should be turned on.

Save, then compile, in the control window, press HELP

Type Slider_ctrl_sample

Slide the slider up and down with your hand, and the LED will turn on and off.

FY