Please advise on porting from STM32F407 to GD32F407

lifuqin

Please advise on porting from STM32F407 to GD32F407 [Copy link]

Recently, there is a project that requires localization of chips, so I plan to replace STM with GD. I didn’t find much information on the Internet. My current plan is to transplant it based on the GD32 library. There is a macro called PAout() in the stm32 code. I didn’t find a similar writing method related to GD, only bit operation registers. But what I want is to find a similar writing method directly and then directly replace the PAput macro definition in the original code. Friends who have encountered this problem, I would be very grateful!

lifuqin

If there is a better way to transplant, please tell me. I would be very grateful if you have relevant information

lifuqin

Thank you everyone, I have found the formula for bitband operation

wangerxian

Some can be directly compiled with the stm32 kernel and burned into GD, and many models are compatible.

freebsder

Direct burning

lugl4313820

If you look at the library code, the programs are the same, just the letters are different.