[Mil MYC-JX8MPQ Review] + Unboxing and Screen Review

流行科技

[Mil MYC-JX8MPQ Review] + Unboxing and Screen Review [Copy link]

 

Thanks to Mir for giving me the opportunity to review this product again. Let’s start with the unboxing review.

The packaging of this board is similar to that of the previous MP151 board, and comes with a packing list and a user guide.

The first impression I got was that it was big. The board is made up of two parts. One part is the core board with a heat sink, which is connected to the bottom board in the same way as the memory stick with gold fingers. Secondly, the board has a rich interface. As long as the display part is designed, it can be connected to screens with multiple interfaces. Expansion interfaces are also reserved.

This time we will use an LVDS adapter board to transfer a 7-inch display.

We use this 2.0 interface, which is a single 8-pin standard interface. The only downside is that the power supply cannot be selected. I have a 3.3V power supply adapter board, so I took out the power supply and connected it to the 3.3V port. This is not very convenient.

After the modification, we need to select the required device tree through uboot, which has many test device trees built in. Then you can see the effect.

I pulled out the red power wire.

Connected to this 3V3.

wangerxian

This heat sink is a bit big, and the screen was successfully touched right away, not bad! Looking forward to the follow-up!