2807 views|19 replies

1w

Posts

25

Resources
The OP
 

Bike modification series: Modification buttons [Copy link]

 

Previously, the horn button was on the solar panel, which was not convenient to press, so I wanted to modify it and move the button to the faucet armrest. Considering that the faucet is small and not easy to fix, I finally used the following method:

First cut the perforated board to a suitable size, then solder the SMD 6x6 button on it. The button controls the positive pole of the power supply, so it is connected in a common anode mode. When pressed, the power is turned on.

In order to facilitate fixing, no wires are welded on the reverse side to avoid protrusions. Finally, apply a few layers of waterproof paint and install it after it dries. First, use strong double-sided tape to stick the small key board to the appropriate position of the faucet, and then wrap the copper wire around it to fix it. Install one on each side, which is very convenient to use.

Finally, weld the power supply of the equipment, and the welding points also need to be waterproofed to avoid corrosion and short circuit.

This post is from DIY/Open Source Hardware

Latest reply

My speaker is so tight, it feels like sending a telegram   Details Published on 2021-11-23 15:56
 

2w

Posts

74

Resources
2
 

Doesn’t this feel very cool when pressed?

This post is from DIY/Open Source Hardware
Add and join groups EEWorld service account EEWorld subscription account Automotive development circle

Comments

The copper wire is a bit uncomfortable to the touch. I will think about how to fix it when I have time.  Details Published on 2021-11-23 08:23
Personal signature

加油!在电子行业默默贡献自己的力量!:)

 
 

4005

Posts

0

Resources
3
 

I also want to modify my car horn, so it can be more stylish, but unfortunately I don't have the courage

This post is from DIY/Open Source Hardware

Comments

You can install a big speaker, but you might get scolded.  Details Published on 2021-11-23 09:53
You can install a big speaker, but you might get scolded.  Details Published on 2021-11-23 08:25
You can install a big speaker, but you might get scolded.  Details Published on 2021-11-23 08:22
 
 
 

1412

Posts

3

Resources
4
 

Is it easy to press such a small button?

This post is from DIY/Open Source Hardware

Comments

OK, the key quality is very good  Details Published on 2021-11-23 08:22
 
 
 

1w

Posts

25

Resources
5
 
huo_hu posted on 2021-11-22 18:51 I also want to modify my car horn, which will be very cool, but unfortunately I don’t have the courage

You can install a big speaker, but you might get scolded.

This post is from DIY/Open Source Hardware
 
 
 

1w

Posts

25

Resources
6
 
annysky2012 posted on 2021-11-22 22:37 Is such a small button easy to press?

OK, the key quality is very good

This post is from DIY/Open Source Hardware
 
 
 

1w

Posts

25

Resources
7
 
soso posted on 2021-11-22 14:19 Doesn’t this look very cool?

The copper wire is a bit uncomfortable to the touch. I will think about how to fix it when I have time.

This post is from DIY/Open Source Hardware

Comments

It seems there will be a follow-up to the transformation haha  Details Published on 2021-11-23 09:57
 
 
 

1w

Posts

25

Resources
8
 
huo_hu posted on 2021-11-22 18:51 I also want to modify my car horn, which will be very cool, but unfortunately I don’t have the courage

You can install a colored light on the wheel, which is simple and effective.

This post is from DIY/Open Source Hardware
 
 
 

1582

Posts

0

Resources
9
 

Buy a separate button than this one

This post is from DIY/Open Source Hardware

Comments

One is that a single button is not enough, there are several other functions, and it is not easy to install.  Details Published on 2021-11-23 09:48
 
 
 

1w

Posts

25

Resources
10
 
This post was last edited by dcexpert on 2021-11-23 09:50
se7ens posted on 2021-11-23 09:35 Buying a separate button is better than this

One is that a single button is not enough, there are several other functions, and it is also difficult to install.

This type of independent button is more commonly used in electric vehicles and has a larger position

This post is from DIY/Open Source Hardware
 
 
 

2w

Posts

74

Resources
11
 
huo_hu posted on 2021-11-22 18:51 I also want to modify my car horn, which will be very cool, but unfortunately I don’t have the courage

I'll try it when I change my car soon. Haha

This post is from DIY/Open Source Hardware
Add and join groups EEWorld service account EEWorld subscription account Automotive development circle
Personal signature

加油!在电子行业默默贡献自己的力量!:)

 
 
 

2w

Posts

74

Resources
12
 
dcexpert posted on 2021-11-23 08:23 The copper wire is a bit uncomfortable to use. I will think about how to modify it when I have time

It seems there will be a follow-up to the transformation haha

This post is from DIY/Open Source Hardware
Add and join groups EEWorld service account EEWorld subscription account Automotive development circle
Personal signature

加油!在电子行业默默贡献自己的力量!:)

 
 
 

6778

Posts

2

Resources
13
 

What functions do these buttons have?

This post is from DIY/Open Source Hardware

Comments

Two side lights are also required.  Details Published on 2021-11-23 11:38
 
 
 

1w

Posts

25

Resources
14
 
wangerxian posted on 2021-11-23 11:10 What functions do these buttons have?

Two side lights are also required.

This post is from DIY/Open Source Hardware

Comments

Turn signal? ?  Details Published on 2021-11-23 11:57
 
 
 

6778

Posts

2

Resources
15
 
dcexpert posted on 2021-11-23 11:38 Also install 2 side lights

Turn signal? ?

This post is from DIY/Open Source Hardware

Comments

Um  Details Published on 2021-11-23 13:49
 
 
 

5220

Posts

239

Resources
16
 

Fortunately, this is a bicycle, otherwise the police would come to find you

But you'd better be careful. I always feel that it will prick my hands. Also, if the car is hit, the circuit has no shock absorption and will break.

Can it be wrapped with a layer on the outside, like the handle of some badminton rackets, which is wrapped in circles, or called a sweat-absorbing belt?

This post is from DIY/Open Source Hardware
Add and join groups EEWorld service account EEWorld subscription account Automotive development circle

Comments

It's not afraid of breaking, it's very strong. The idea of a sweatband is good, I'll look for it.  Details Published on 2021-11-23 13:52
 
 
 

1w

Posts

25

Resources
17
 
 
 
 

1w

Posts

25

Resources
18
 
nmg Published on 2021-11-23 12:11 Fortunately, this is a bicycle, otherwise the police will come to you. But you should be careful, I always feel that it will prick my hands. Also, if the bicycle is hit, the circuit is not reduced...

It's not afraid of breaking, it's very strong. The idea of a sweat belt is good, I'll look for it.

This post is from DIY/Open Source Hardware
 
 
 

4005

Posts

0

Resources
19
 

My speaker is so tight, it feels like sending a telegram

This post is from DIY/Open Source Hardware

Comments

The modified buttons feel like this  Details Published on 2021-11-23 17:07
 
 
 

1w

Posts

25

Resources
20
 
huo_hu posted on 2021-11-23 15:56 My speaker is very tight, it feels like sending a telegram

The modified buttons feel like this

This post is from DIY/Open Source Hardware
 
 
 

Guess Your Favourite
Just looking around
Find a datasheet?

EEWorld Datasheet Technical Support

Featured Posts
Analog Electronics

<<Analog Electronics>> is a very good book, I hope it will be helpful to your design journey!

Infineon Position2Go Development Kit Review - skypinglee

This content is provided by EEWORLD Forum 1. Unboxing I am honored to participate in the evaluation of the Infineon Po ...

CAN IAP Example

This content is originally created by EEWORLD forum user Xueshan Feihu11 . If you want to reprint or use it for comm ...

TI's Several Important Notes on Ethernet

TI Ethernet has grown by leaps and bounds since its introduction and is now widely used in the commercial and enterprise ...

Commonly used techniques in PCB design

Commonly used techniques in PCB design In the current mainstream market, the most commonly used circuit diagram drawing ...

[Flower carving DIY] Interesting and fun music visualization series of small projects (04) --- WS2812 strip light

This post was last edited by eagler8 on 2021-10-8 19:08 I suddenly had the urge to do a series of topics on sound visua ...

[Xianji HPM6750 Review] Testing the Ethernet Controller ENET

HPM6750 has 2 Gigabit Ethernet controllers. The MINI board leads to a RMII interface Ethernet controller HPM_ENET1 PIN ...

Use GD32F407RET6 USART5 DMA to send and receive data

As the title says, there is no problem with DMA sending data, but the microcontroller cannot receive data, and the recei ...

Image Dimension Measuring Instrument: Analyzing Applicable Components and Application Fields

Image dimension measuring instrument is also called one-button measuring instrument, fully automatic flash measuring ins ...

[Monthly awards are given out!] February monthly awards are distributed! There are awards for original creation, question discussion, and reply to questions!

Good afternoon, friends~ The list of winners for the monthly prizes in February is out~~~ There are prizes for original ...

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list