[ART-Pi Review] VI: Review of ATT-Pi's onboard Flash file system and FTP functions in RTT Studio environment

kit7828

[ART-Pi Review] VI: Review of ATT-Pi's onboard Flash file system and FTP functions in RTT Studio environment [Copy link]

 

There have been too many things going on recently, which has greatly delayed the review progress. I apologize to everyone.

Open RT-Thread Studio, the previous project, (you can also create a new sample project based on ART-Pi, such as Art Pi blink led) enter RTT Settings, set the following in the hardware

Ctrl-S save and compile and download directly

Enter the terminal

You can see that the file system operation was successful.

Next, verify FTP

Return to RTT Settings

After enabling the FTP library component, press Ctrl-s to save.

Then add two lines of code in main.c

After compiling, download to the development board

Then open the terminal

1. Connect the development board to WiFi and obtain the IP address

2. After the test computer is connected to the same WiFi, use the FTP client tool to log in to the development board

3. Upload file test

4. Verify the uploaded file on the development board terminal.

This review is over, and everyone is welcome to comment. I apologize again for the delay.

Jacktang

After the test computer is connected to the same WiFi, use the FTP client tool to log in to the development board and the last step of opening the terminal icon is more detailed.

freebsder

It seems that rtt is doing quite conveniently now.