【LAUNCHXL-CC1350-4】- 2: This is somewhat similar to what I imagined before and somewhat different

MianQi

【LAUNCHXL-CC1350-4】- 2: This is somewhat similar to what I imagined before and somewhat different [Copy link]

After reading the information, I concluded that this manual is more important - "SimpleLink CC1352P wireless MCU LaunchPad Development Kit Quick Start Guide" ( https://dev.ti.com/tirex/explore/node?devtools=LAUNCHXL-CC1352P-4&node=ALaSydRrlr2toH4eyvK8FQ__FUz-xrs__LATEST )

According to here:

There are three boards based on CC1352P, but the board I have is labeled: CC1352P1-4

At first I thought it was a mix of P1 and P-4, but based on the pictures on the TI website, I learned that it was probably just P-4, because P1 looks like this:

（https://dev.ti.com/tirex/explore/node?devtools=LAUNCHXL-CC1352P1&node=ABYBwBUVhx3UPhClxKWrVg__FUz-xrs__LATEST）

MianQi

The example project (project zero) is here: https://dev.ti.com/tirex/explore/node?node=AGvm9KQnl2l0bnfTKlzOvQ__pTTHBmu__LATEST

The sample code is based on Bluetooth 5 (BLE5-Stack).

Note about the sample code: When you turn on the Bluetooth of your Android mobile phone, you can see the "project zero" object, but it cannot be matched. The reason is that you have not downloaded and installed the apk provided by TI:

After downloading and installing the APK:

MianQi

Here is an example of the first application:

soso

Very good, looking forward to the follow-up of the OP, hahaha

What functions does the OAD service mainly test?

MianQi

soso posted on 2021-7-7 11:59 Very good, looking forward to the follow-up of the OP, hahahaha What functions does the OAD service mainly test?

As of now, it seems that it only graphically displays the amplitude and period of the pulse signal generated after pressing the key (on the board).

soso

MianQi posted on 2021-7-7 18:14 As far as the current situation is concerned, it seems that it only displays the amplitude and period of the pulse signal generated after the key (on the board) is pressed in an image.

Oh hey is that a pressure sensor?

MianQi

Possibly, we are still figuring it out. Based on the current conception, it seems that these two buttons can be made into a double-paddle Morse code transmitter.