max30102 MCU selection

1nnocent

max30102 MCU selection [Copy link]

The problem of selecting a single-chip microcomputer. I only need to control a sensor max30102. The sensor needs to process uint32_t data. It is probably inconvenient to use a 51 single-chip microcomputer. If there is a master who can recommend a good 51, it is not impossible. Hahaha

chunyang

8-bit MCU can process 32-bit data as long as it does not involve real-time. Obviously, max30102 belongs to this category. Not to mention control alone, any MCU is sufficient, and there is no inconvenience at all. As for which one is suitable, it needs to be considered comprehensively according to the application requirements, but the original poster did not provide relevant information. As far as the original poster's post is concerned, any MCU can do the job.

dcexpert

As long as the compiler supports the uint32_t type, it can be used. Now the main problem should be to find a suitable MCU with stable supply.

深宣宣

I feel like there are so many people asking about 16-bit pins now, so it’s a bit of a waste to use 32!

深宣宣

As long as the compiler supports the uint32_t type, it can be used. There is a suitable MCU from LG in South Korea that can be stably supplied.