【ESP32-Korvo Review】 03 Blinker Lighting

天意无罪

【ESP32-Korvo Review】 03 Blinker Lighting [Copy link]

 

As soon as I got to work at the beginning of the year, I started working 996 , which is unbearable. I took advantage of the Sunday break to quickly write the review document.

As planned, this review article should describe the environment setup of the ESP32-Korvo development board. Before starting to build the environment, I remembered that I had developed a program for the ESP32-WROOM module using Arduino before , so I first moved to Arduino to see if it supports the ESP32-WROVER module.

Start Arduino and find the ESP32-WROVER module option in the ESP32 support package installed previously .

So I planned to burn the smart atmosphere light program I made with the ESP32-WROOM module to the ESP32-Korvo development board to see if it can run normally.

The program changes are very simple, you only need to change two macro definition parameters to control the IO pins of the RGB WS2812 and the number of WS2812 .

Click the "Upload" button, Arduino will automatically compile and burn the firmware. Wait for a few minutes and it will prompt that the firmware has been successfully burned.

Run the Blinker APP on your mobile phone , and it will show that the device is online. The APP interface is as shown below.

The above two pictures show the effect: running light and breathing light;

Source code sharing:

Blinker_LED.c (15.85 KB, downloads: 13)

2021-3-7 20:21 上传

点击文件名下载附件

PS: If you want to learn more about the development environment of Arduino Blinker, you can refer to a post I posted on the next forum: https://bbs.21ic.com/forum.php?mod=viewthread&tid=3049260&page=1&extra=#pid11647522

okhxyyo

Thanks for sharing. If you are not participating in an event and the other party's site requires that the content cannot be transferred to other places, can you transfer a copy of the content about the Arduino Blinker development environment you mentioned to our forum? This way, it will be more convenient for netizens to read the content~~

w494143467

Hahaha, same as before, working overtime during the New Year is a headache!

天意无罪

okhxyyo posted on 2021-3-8 11:11 Thank you for sharing. If it is not the kind of activity that the other party's site requires that it cannot be transferred to other places, can you please share the Arduino Blinke you mentioned...

This is also a review activity about ESP32 modules in the neighboring forum. There is no explicit prohibition on reprinting there. If you don't mind, I can attach the link.

okhxyyo

Tianyiwuzui published on 2021-3-8 13:56 It is also a review activity about ESP32 module in the neighboring forum. It is not explicitly prohibited to reprint it there. If you don’t mind, I can link...

You can directly link it, but don’t link it directly. If netizens need it, they can just copy the link and open it themselves.

天意无罪

okhxyyo posted on 2021-3-8 15:15 You can directly link, but don't link directly to the past. Netizens can copy the link and open it if they need it.

OK

天意无罪

w494143467 posted on 2021-3-8 13:37 Hahaha, same, working overtime during the New Year is a headache!

Alas, the poor siege lion.

okhxyyo

Tian Yi Wu Gui published on 2021-3-8 16:26 OK

Claws~~

Jacktang

You can briefly introduce the development environment, as long as it does not conflict with them.

The effects of the running lights and breathing lights are quite painful

w494143467

天意无罪 posted on 2021-3-8 16:54 Alas, the poor siege lion.

It is a bug-shooting lion, a bunch of design and hardware bugs need to be filled by software!!!