【RPi Pico】Install MicroPython

dcexpert

【RPi Pico】Install MicroPython [Copy link]

 

You can connect the Pico to your computer via USB and then drag and drop a file onto the Pico to program it. The Raspberry Pi Pico comes with a downloadable UF2 firmware that makes installing MicroPython even easier.

1. Click the button below to download the MicroPython UF2 file.
2. While holding down the BOOTSEL button, plug the Pico into the USB port of your Raspberry Pi or other computer. Release the BOOTSEL button once the Pico is connected.
3. A storage device called RPI-RP2 will be installed on your computer.
4. Drag and drop the MicroPython UF2 firmware onto the RPI-RP2 disk and the Pico will automatically reboot with MicroPython already running. The REPL can then be accessed over the USB serial interface.

Firmware address:

https://www.raspberrypi.org/documentation/pico/getting-started/static/5d8e777377e8dbe23cf36360d6efc727/pico_micropython_20210121.uf2

tagetage

Thumbs up, save the programmer.

dcexpert

Note that after installing the MicroPython firmware, the disk will not be displayed, which means that files cannot be copied via a USB flash drive.

cxmin

What hardware platforms is MicroPython suitable for?

dcexpert

cxmin posted on 2021-2-3 21:50 What hardware platforms are suitable for micropython? ?

Currently mainly:

• STM32
• ESP32
• ESP8266
• nRF51/52