MSP430F5529 USB Experimenter Board

火辣西米秀

MSP430F5529 USB Experimenter Board [Copy link]

Product Features

• Integrated MSP430F5529:
  • 128KB Flash/8KB SRAM (10kB if USB disabled)
  • Full-speed USB 2.0
  • 16-bit RISC architecture, up to 25MHz
  • 3 Timer_A blocks, 1 Timer_B block
  • 2 USCI (UART/SPI/I2C) blocks, 16-channel 12-bit ADC12_A, 12-channel Comp_B, 63 I/O
• USB Development Platform
• 5 capacitive touch strips (button or slider functionality)
• microSD card slot with 1GB memory card.
• 102x64 grayscale dot matrix LCD with backlight.
• 4 buttons (2 user-configurable buttons, 1 reset button, 1 USB boot button)
• 3 general purpose LEDs, 5 LEDs for capacitive touch buttons and 1 LED power indicator.
• Roller/Potentiometer
• Integrated EM header to support TI low power RF wireless evaluation modules and eZ430-RF2500T. Currently supported modules:
  • CC1100/CC1101EMK - Sub-1 GHz Radio
  • CC2500EMK - 2.4GHz Radio
  • CC2420/CC2430EMK - 2.4GHz 802.15.4 Radio
  • CC2520/CC2530EMK - 2.4GHz 802.15.4 Radio
• Integrated eZ-FET for Spy-Bi-Wire (2-wire JTAG) programming and debugging.
• JTAG header for full 4-wire JTAG programming and debugging.
• Multiple power supply options including USB, JTAG, battery, or external power.
• Provides easy access to F5529 I/O pins for prototyping. Port mapping is provided for additional flexibility.

describe

Download design files

The MSP430F5529 Experimenter Board (MSP-EXP430F5529) is a development platform for the MSP430F5529 device, from the latest generation of MSP430 devices with integrated USB. The board is compatible with many TI low-power RF wireless evaluation modules, such as the CC2520EMK. The board helps designers quickly learn and develop with the new F55xx MCUs, which offer the industry's lowest active power, integrated USB, more memory, and leading integration for applications such as energy harvesting, wireless sensing, and automatic metering infrastructure (AMI).

The MSP430F5529 device on the experimenter board can be powered and debugged through the integrated ezFET or through a TI flash emulation tool such as the MSP-FET430UIF.

• Based on the new MSP430F5529 MCU for ultra-low-power designs requiring enhanced functionality and integrated USB
• Enables rapid low-power wireless development with the eZ430-RF2500 tool, an out-of-the-box platform for Z-Stack Pro and support for a wide range of TI low-power RF wireless evaluation modules, covering sub-1 GHz and 2.4 GHz frequency bands
• 102x64 dot matrix LCD for various user interfaces and entertainment games
• Multiple input/output options enable rapid system development: capacitive touch buttons/sliders, push buttons, USB, micro SD slot, LEDs, and scroll wheels.
• The integrated ezFET allows the board to be plugged directly into a PC via USB for power and debugging.
• JTAG header connection for 4-wire JTAG programming and debugging with the MSP-FET430UIF.
• Compatible with Code Composer Studio, a free 16KB IDE
• A complete user experience software demo is pre-installed and source code is available for download.
• PCB designs available for download (Eagle PCB)

The ECCN (Export Control Classification Number) classification of this tool is the same as the classification of the included microcontroller. For ECCN information for the microcontroller, refer to the datasheet for that device.

Any use based on Texas Instruments (TI) classifications (whether ECCN or HTS) is without warranty of any kind and is at the user's own risk. HTS and export classifications are subject to change. Your company, as the exporter of record, is responsible for determining the correct classification of all goods during export. Any HTS or export classifications provided by TI are for TI's internal use only and should not be construed as a representation or warranty of correct export classification and may not be used as a basis for licensing decisions.

Download design files