Hot Must-Read丨20 Questions and Answers from Data Converters (ADI)

EEWORLD社区

Hot Must-Read丨20 Questions and Answers from Data Converters (ADI) [Copy link]

ADI has compiled the >> [20 wonderful questions and answers] in the precision converter area in recent months for everyone. I hope you can use it~

Click to view >> 【Wonderful Q&A】

FAQ

● About the hardware circuit of AD5757
● About the fault 0X40 reported by AD2S1210
● The input signal of AD7634 is disturbed, why?
● The sysref of AD9162-FMC-EBZ test board is always high
● The reason why the ADC data of AD7980 reference voltage is not linear when using OPA170 as voltage buffer?
● Questions in the ADUCM360 data sheet
● The main difference between ADuCM320 and ADuCM320i?
● The ad7606b gets the correct timing but the data read out is wrong, why?
● Ask about the voltage problem of AD7689 REF pin
● AD5123 RAB input frequency problem
● Static electricity causes abnormal BUSY signal of AD7616, what is the solution?
● Where is the DGND of ADUCM360?
● What is the input voltage range of LT1395 op amp?
● About the voltage output of AD5535B
● When LT1395 is used as a voltage follower, does the choice of feedback resistor have anything to do with the power supply voltage?
● The channel of AD7616 cannot be converted. Why?
● The internal reference voltage of AD7689 seems to be cut off. Why?
● Does the ADC sampling CONV of AD4000 series need a rising edge?
● Will the negative voltage of AD574A damage the chip?
● Why can't AD5763 read and write normally?