3788 views|5 replies

5

Posts

0

Resources
The OP
 

Can anyone recommend a 12V input step-down chip that can output around 10A? [Copy link]

A 12V model aircraft battery is needed to drive 6 7V servos. Each servo requires 1A of current to maintain, not including the stall current.

Do you have any chips to recommend?

This post is from Power technology

Latest reply

Take a look at the product H6101 of Shenzhen Huixinchen Electronics Co., Ltd., which may now be upgraded to H6201, which supports 8-120V input, 4.2-30V output, maximum output current of 10A, and output efficiency of 98%. Shenzhen Huixinchen Electronics Co., Ltd.   Details Published on 2019-12-24 14:40
 
 

2w

Posts

0

Resources
2
 

Enter your requirements on the TI official website and suitable chips will be recommended to you.

This post is from Power technology
 
 
 

2w

Posts

341

Resources
3
 

How much does the 12V input drop to, and what is the power supply voltage range of the servo?

You need to figure out how much current you need to find the right one, or someone can recommend it to you.

This post is from Power technology
 
 
 

49

Posts

0

Resources
4
 
Can it be separated? There is a 12V input, 2A switching buck IC, vas5175A/vas5176,
This post is from Power technology
 
 
 

2w

Posts

341

Resources
5
 

The host asked and ran away, without any response.

This post is from Power technology
 
 
 

35

Posts

0

Resources
6
 

Take a look at the product H6101 of Shenzhen Huixinchen Electronics Co., Ltd., which may now be upgraded to H6201, which supports 8-120V input, 4.2-30V output, maximum output current of 10A, and output efficiency of 98%. Shenzhen Huixinchen Electronics Co., Ltd.

This post is from Power technology
 
 
 

Guess Your Favourite
Find a datasheet?

EEWorld Datasheet Technical Support

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list