How to modify the pin port of MSP430F5529

闵丨大

How to modify the pin port of MSP430F5529 [Copy link]

Hello everyone! I am using the MSP430F5529 development board and burning the " singlePWM project " provided by TI . The code uses the P2.0 port and I read the board schematic. I want to change the PWM output pin to P1.4 . After compiling and burning, I use an oscilloscope to observe that P1.4 does not have a waveform output. What else needs to be modified?

Looking forward to your reply!

Figure 2 Before modifying the pins

Figure 3 After modifying the pins

Figure 4 P1.4 has PWM output function

lcofjp

You only modified the pin configuration, the PWM configuration also needs to be modified.

闵丨大

lcofjp posted on 2019-8-29 21:27 You only modified the pin configuration, and the PWM configuration also needs to be modified.

Thank you for your reply! The problem has been solved

闵丨大

The problem has been solved!!! For details, please see my link

https://en.eeworld.com/bbs/forum.php?mod=viewthread&tid=1088357&page=1&extra=